|Information and Acknowledgement|
The following acknowledgment statement must be included in all published reports of work conducted at the APS:
This research used resources of the Advanced Photon Source, a U.S. Department of Energy (DOE) Office of Science User Facility operated for the DOE Office of Science by Argonne National Laboratory under Contract No. DE-AC02-06CH11357.
“Progress of nanopositioning stages development for hard x-ray nanofocusing and coherence preservation optics at the APS,” D. Shu, AIP Conf. Proc. 1741, 030012 (2016); http://dx.doi.org/10.1063/1.4952835.
“Design of a cryo-cooled artificial channel-cut crystal monochromator for the European XFEL,” X. Dong, D. Shu and H. Sinn, AIP Conf. Proc. 1741, 040027 (2016); http://dx.doi.org/10.1063/1.4952899.
“Mechanical design of thin-film diamond crystal mounting apparatus for coherence preservation hard x-ray optics,” D. Shu, Y. V. Shvyd’ko, S. Stoupin and K-J. Kim, AIP Conf. Proc. 1741, 030016 (2016); http://dx.doi.org/10.1063/1.4952839.
“Mechanical design of a compact rotary flexure stage with ten-degree-level travel range and ten-nanoradian-lavel positioning resolution,” D. Shu, S. Kearny, J. Anton, J. Maser, and J. Wang, Proceedings of ASPE 2015 Spring topical meeting, Boston, MA, April 2016.
“Ambient Vibration Measurement for APS 32‐ID‐C Floor, Table, and Sample Stages, J. Anton, S. Kearney, V. De Andrade, A. Deriy, and D. Shu, APS/ANL/LS-342, June, 2016.
“Ambient Vibration Measurement for APS floor at Sectors 29, 26, 23, and 21,” J. Anton, S. Kearney, and D. Shu, APS/ANL/LS-343, June, 2016.
“A Survey of Floor Vibration Noise at all Sectors in the APS Experiment Hall,” S. Kearney and D. Shu, APS/ANL/LS- 344, August 2016.
“Mechanical design and development of compact linear nanopositioning flexure stages with centimeter-level travel range and nanometer-level resolution,” D. Shu, W. Liu, S. Kearney, J. Anton, B. Lai, J. Maser, C. Roehrig, and J. Z. Tischler, Proceedings of MEDSI-2016, Sept. 11-16, 2016, Barcelona, Spain.
“Precision mechanical design of a miniature dynamic mirror bender for the SSRF beamline upgrade project,” D. Shu, A. Li, S. P. Kearney, C. Mao, J. Anton, and Y. Pan, Proceedings of MEDSI-2016, Sept. 11-16, 2016, Barcelona, Spain.
“The design of a precision mechanical assembly for a hard x-ray polarizer,” S. P. Kearney, D. Shu, T. S. Toellner, Proceedings of MEDSI-2016, Sept. 11-16, 2016, Barcelona, Spain.
“Nanopositioning stages design for four-crystal hard x-ray beam split-and-delay line with coherence preservation,“ D. Shu, Y. Shvyd’ko, S. Stoupin, J. Anton, S. Kearny, and K. Goetze, Proceedings of ASPE 2015 Annual Meeting, Austin, TX, Nov. 2015.
“Mechanical design of a precision linear flexural stage for 3-D x-ray diffraction microscope at the Advanced Photon Source”, D. Shu, W. Liu, S. Kearney, J. Anton, and J. Z. Tischler, Proceedings of SPIE-2015, Optomechanical Engineering conference, 9573-28, San Diego, CA, Aug. 2015.
“Optomechanical design of a high-precision detector robot arm system for x-ray nano-diffraction with x-ray nanoprobe,” D Shu, S Kalbfleisch, S Kearney, J Anton and Y S Chu, Journal of Physics: Conference Series 493 (2014) 012027, doi:10.1088/1742-6596/493/1/012027.
“Design of a Precision Two-Dimensional Tip-Tilting Stage System for Autocollimator-based Long Trace Profiler Angular Calibration,” D. Shu, J. Qian, W. Liu, S. Kearney, J. Anton, J. Sullivan, and L. Assoufid, Proc. SPIE Vol. 9206-17 (2014).
“Optomechanical design of a modular K-B mirror mount system for x-ray microfocusing at the Advanced Photon Source,” D. Shu, R. Harder, J. Almer, N. Kujala, S. Kearney, J. Anton, W. Liu, B. Lai, J. Maser, L.Finney, B. Shi, J. Qian, S. Marathe, A. Macrander, J. Tischler, S. Vogt, and L. Assoufid, , Proc. SPIE Vol. 8836, 88360O (2013)
“Design of a precision flexural linear stage system with sub-nanometer resolution and 12-mm travel range,” D Shu, S Kearney, and C Preissner, J. Phys. Conf. Ser. 425 212011 (2013) DOI:10.1088/1742-6596/425/21/212011
“Optomechanical Design of a Multilayer Laue Lens Test Bed for 10-nm Focusing of Hard X-rays,” D. Shu, E. Nazaretski, J. Kim, H. Yan, K. Lauer, B. Mullany, D. Kuhne, J. Maser, Y. S. Chu, J. Phys. Conf. Ser. 463 (2013) 012029 DOI:10.1088/1742-6596/463/1/012019
“Design of a diamond-crystal monochromator for the LCLS hard x-ray self-seeding project,” D. Shu, Y. Shvyd’ko, J. Amann, P. Emma, S. Stoupin, J. Quintana, J. Phys. Conf. Ser. 425 052004 (2013) DOI:10.1088/1742-6596/425/5/052004
“Demonstration of self-seeding in a hard-X-ray free-electron laser,” J. Amann, et al., Nature Photonics DOI:10.1038 (2012)180