Experimental Physics and
Industrial Control System

On 4/20/11 11:21 AM, Benjamin Franksen wrote:
> This is a second release candidate for seq-2.0.13. I followed Andrew's
> suggestions and moved the error detection for assign to 64 bit long from snc
> to the C compiler (via #if ... #error...). This version should now complain
> if and only if the program contains an assign clause for a long or unsigned
> long *and* the program is compiled for an architecture where a long is
> larger than 4 bytes.

Hi, Ben.

Now the build fails trying to build tooLong.st.  The build log
is at
<https://www.imca.aps.anl.gov/~jlmuir/tmp/seq-2.0.13-rc2-build.txt>.

If I remove "PROD += tooLong" from test/validate/Makefile, the
build completes successfully.  The build log for this is at
<https://www.imca.aps.anl.gov/~jlmuir/tmp/seq-2.0.13-rc2-build-r1.txt>.

The host was running RHEL 5.6 and the GCC version was "4.1.2
20080704 (Red Hat 4.1.2-50)".

Thanks,

Lewis

Replies:

Re: seq-2-0-13-rc2 Benjamin Franksen

References:

New sequencer bugfix release candidate Benjamin Franksen

seq-2-0-13-rc2 Benjamin Franksen

Navigate by Date:

Prev: Re: PyEpics and Python threads Matt Newville

Next: Re: shell command arguments limitation? Daron Chabot

Index: 1994  1995  1996  1997  1998  1999  2000  2001  2002  2003  2004  2005  2006  2007  2008  2009  2010  <2011>  2012  2013  2014  2015  2016  2017  2018  2019  2020  2021  2022  2023  2024 

Navigate by Thread:

Prev: Re: shell command arguments limitation? Daron Chabot

Next: Re: seq-2-0-13-rc2 Benjamin Franksen

Index: 1994  1995  1996  1997  1998  1999  2000  2001  2002  2003  2004  2005  2006  2007  2008  2009  2010  <2011>  2012  2013  2014  2015  2016  2017  2018  2019  2020  2021  2022  2023  2024