Experimental Physics and
Industrial Control System

"Szalata, Zenon M." <[email protected]> · Wed, 26 Jan 2011 11:33:24 -0800

Hi Tom,
I downloaded the tar file from the link below.
I am having trouble building the examples.  I get this error:

make[4]: Entering directory `/afs/slac.stanford.edu/g/testfac/vol4/workspace/zms/rhel5/R3.14.11/ioc/aravisnew/aravisGigE-0-1-2/iocs/example/iocBoot/iocexample/O.linux-x86'
Installing created file ../../../bin/linux-x86/../stexample.sh
make[4]: *** No rule to make target `../../../bin/linux-x86/stexample.boot', needed by `buildInstall'.  Stop.

I can't find stexample.boot file.  Is it perchance stexample.src?
Anyway, the file tree structure you are using is different from what I am used to and right now I feel a bit at a loss.

Thank you,
Zen

> -----Original Message-----
> From: [email protected] [mailto:[email protected]]
> Sent: Monday, January 17, 2011 9:53 AM
> To: [email protected]
> Cc: [email protected]; Szalata, Zenon M.
> Subject: GigE driver for Area Detector
> 
> Hi all,
> 
> As a couple of people have asked for it, I've made a preliminary release
> of the my areaDetector driver for GigE cameras on Linux based on the
> aravis library. It is only tested on Prosilica/AVT cameras, although it
> should work with all GigE vision compliant cameras but, as always, some
> cameras are more compliant than others...
> 
> http://controls.diamond.ac.uk/downloads/support/aravisGigE
> 
> Once you have built the module, there are 2 helper programs in the
> bin/linux-x86 directory, arv-show-devices will list all the GigE vision
> cameras visible on the network, and dumpXml will dump their Genicam xml
> files to disk. Please email me the outputs of these 2 programs if your
> camera doesn't work properly.
> 
> Thanks,
> Tom Cobb,
> Diamond Light Source Ltd.
> Diamond House
> Harwell Science and Innovation Campus
> Didcot
> Oxfordshire
> OX11 0DE
> Tel +44 (0) 1235 778582
> 
> 
> --
> This e-mail and any attachments may contain confidential, copyright and or
> privileged material, and are for the use of the intended addressee only. If you
> are not the intended addressee or an authorised recipient of the addressee
> please notify us of receipt by returning the e-mail and do not use, copy, retain,
> distribute or disclose the information in or attached to the e-mail.
> Any opinions expressed within this e-mail are those of the individual and not
> necessarily of Diamond Light Source Ltd.
> Diamond Light Source Ltd. cannot guarantee that this e-mail or any attachments
> are free from viruses and we cannot accept liability for any damage which you
> may sustain as a result of software viruses which may be transmitted in or with
> the message.
> Diamond Light Source Limited (company no. 4375679). Registered in England
> and Wales with its registered office at Diamond House, Harwell Science and
> Innovation Campus, Didcot, Oxfordshire, OX11 0DE, United Kingdom
> 
> 
> 

Experimental Physics and Industrial Control System

Experimental Physics and
Industrial Control System