I think they generate their startup files from a script. You probably
need to manually create an st.cmd file based on their template.
-----Original Message-----
From: [email protected]
[mailto:[email protected]] On Behalf Of Szalata, Zenon M.
Sent: Wednesday, January 26, 2011 1:33 PM
To: [email protected]; [email protected]
Subject: RE: GigE driver for Area Detector
Hi Tom,
I downloaded the tar file from the link below.
I am having trouble building the examples. I get this error:
make[4]: Entering directory
`/afs/slac.stanford.edu/g/testfac/vol4/workspace/zms/rhel5/R3.14.11/ioc/
aravisnew/aravisGigE-0-1-2/iocs/example/iocBoot/iocexample/O.linux-x86'
Installing created file ../../../bin/linux-x86/../stexample.sh
make[4]: *** No rule to make target
`../../../bin/linux-x86/stexample.boot', needed by `buildInstall'.
Stop.
I can't find stexample.boot file. Is it perchance stexample.src?
Anyway, the file tree structure you are using is different from what I
am used to and right now I feel a bit at a loss.
Thank you,
Zen
> -----Original Message-----
> From: [email protected] [mailto:[email protected]]
> Sent: Monday, January 17, 2011 9:53 AM
> To: [email protected]
> Cc: [email protected]; Szalata, Zenon M.
> Subject: GigE driver for Area Detector
>
> Hi all,
>
> As a couple of people have asked for it, I've made a preliminary
release
> of the my areaDetector driver for GigE cameras on Linux based on the
> aravis library. It is only tested on Prosilica/AVT cameras, although
it
> should work with all GigE vision compliant cameras but, as always,
some
> cameras are more compliant than others...
>
> http://controls.diamond.ac.uk/downloads/support/aravisGigE
>
> Once you have built the module, there are 2 helper programs in the
> bin/linux-x86 directory, arv-show-devices will list all the GigE
vision
> cameras visible on the network, and dumpXml will dump their Genicam
xml
> files to disk. Please email me the outputs of these 2 programs if your
> camera doesn't work properly.
>
> Thanks,
> Tom Cobb,
> Diamond Light Source Ltd.
> Diamond House
> Harwell Science and Innovation Campus
> Didcot
> Oxfordshire
> OX11 0DE
> Tel +44 (0) 1235 778582
>
>
> --
> This e-mail and any attachments may contain confidential, copyright
and or
> privileged material, and are for the use of the intended addressee
only. If you
> are not the intended addressee or an authorised recipient of the
addressee
> please notify us of receipt by returning the e-mail and do not use,
copy, retain,
> distribute or disclose the information in or attached to the e-mail.
> Any opinions expressed within this e-mail are those of the individual
and not
> necessarily of Diamond Light Source Ltd.
> Diamond Light Source Ltd. cannot guarantee that this e-mail or any
attachments
> are free from viruses and we cannot accept liability for any damage
which you
> may sustain as a result of software viruses which may be transmitted
in or with
> the message.
> Diamond Light Source Limited (company no. 4375679). Registered in
England
> and Wales with its registered office at Diamond House, Harwell Science
and
> Innovation Campus, Didcot, Oxfordshire, OX11 0DE, United Kingdom
>
>
>
- Replies:
- RE: GigE driver for Area Detector nick.rees
- References:
- GigE driver for Area Detector tom.cobb
- RE: GigE driver for Area Detector Szalata, Zenon M.
- Navigate by Date:
- Prev:
RE: GigE driver for Area Detector Szalata, Zenon M.
- Next:
RE: GigE driver for Area Detector nick.rees
- Index:
1994
1995
1996
1997
1998
1999
2000
2001
2002
2003
2004
2005
2006
2007
2008
2009
2010
<2011>
2012
2013
2014
2015
2016
2017
2018
2019
2020
2021
2022
2023
2024
- Navigate by Thread:
- Prev:
RE: GigE driver for Area Detector Szalata, Zenon M.
- Next:
RE: GigE driver for Area Detector nick.rees
- Index:
1994
1995
1996
1997
1998
1999
2000
2001
2002
2003
2004
2005
2006
2007
2008
2009
2010
<2011>
2012
2013
2014
2015
2016
2017
2018
2019
2020
2021
2022
2023
2024
|