Hi all,
As a couple of people have asked for it, I've made a preliminary release
of the my areaDetector driver for GigE cameras on Linux based on the
aravis library. It is only tested on Prosilica/AVT cameras, although it
should work with all GigE vision compliant cameras but, as always, some
cameras are more compliant than others...
http://controls.diamond.ac.uk/downloads/support/aravisGigE
Once you have built the module, there are 2 helper programs in the
bin/linux-x86 directory, arv-show-devices will list all the GigE vision
cameras visible on the network, and dumpXml will dump their Genicam xml
files to disk. Please email me the outputs of these 2 programs if your
camera doesn't work properly.
Thanks,
Tom Cobb,
Diamond Light Source Ltd.
Diamond House
Harwell Science and Innovation Campus
Didcot
Oxfordshire
OX11 0DE
Tel +44 (0) 1235 778582
--
This e-mail and any attachments may contain confidential, copyright and or privileged material, and are for the use of the intended addressee only. If you are not the intended addressee or an authorised recipient of the addressee please notify us of receipt by returning the e-mail and do not use, copy, retain, distribute or disclose the information in or attached to the e-mail.
Any opinions expressed within this e-mail are those of the individual and not necessarily of Diamond Light Source Ltd.
Diamond Light Source Ltd. cannot guarantee that this e-mail or any attachments are free from viruses and we cannot accept liability for any damage which you may sustain as a result of software viruses which may be transmitted in or with the message.
Diamond Light Source Limited (company no. 4375679). Registered in England and Wales with its registered office at Diamond House, Harwell Science and Innovation Campus, Didcot, Oxfordshire, OX11 0DE, United Kingdom
- Replies:
- RE: GigE driver for Area Detector Szalata, Zenon M.
- Navigate by Date:
- Prev:
RE: EpicsCAServer and EpicsCAClient on Windows 7 64 bit Jeff Hill
- Next:
asyn R4-16 available Mark Rivers
- Index:
1994
1995
1996
1997
1998
1999
2000
2001
2002
2003
2004
2005
2006
2007
2008
2009
2010
<2011>
2012
2013
2014
2015
2016
2017
2018
2019
2020
2021
2022
2023
2024
- Navigate by Thread:
- Prev:
RE: EpicsCAServer and EpicsCAClient on Windows 7 64 bit Jeff Hill
- Next:
RE: GigE driver for Area Detector Szalata, Zenon M.
- Index:
1994
1995
1996
1997
1998
1999
2000
2001
2002
2003
2004
2005
2006
2007
2008
2009
2010
<2011>
2012
2013
2014
2015
2016
2017
2018
2019
2020
2021
2022
2023
2024
|