1994 1995 1996 1997 1998 1999 2000 2001 2002 2003 2004 2005 2006 2007 2008 2009 2010 2011 2012 2013 2014 2015 2016 <2017> 2018 2019 2020 2021 2022 2023 2024 | Index | 1994 1995 1996 1997 1998 1999 2000 2001 2002 2003 2004 2005 2006 2007 2008 2009 2010 2011 2012 2013 2014 2015 2016 <2017> 2018 2019 2020 2021 2022 2023 2024 |
<== Date ==> | <== Thread ==> |
---|
Subject: | Re: Switched PDUs with EPICS support |
From: | Bruce Hill <[email protected]> |
To: | <[email protected]> |
Date: | Wed, 10 May 2017 13:36:21 -0700 |
Hi Ziga, We're using snmp to control PDU's from Leviton, iBootBar, and Sentry via EPICS. Source code available here: http://www.slac.stanford.edu/~bhill/epics-pcds/ioc-R3.14.12/common/Leviton/Leviton-R1.28.2.tar.gz http://www.slac.stanford.edu/~bhill/epics-pcds/modules-R3.14.12/snmp/snmp-R1.1.0-2.7.0.tar.gz Cheers, - Bruce On 05/10/2017 12:06 AM, [email protected] wrote:
Hi, few months ago I developed an EPICS IOC for ATEN PDU (PE8208 - metered and switched) using SNMP device support module (https://groups.nscl.msu.edu/controls/files/devSnmp.html); source code available here: https://github.com/gtortone/ATEN-EPICS Regards, Gennaro On Tue, 9 May 2017, Žiga Oven wrote:Hi All,We are looking for alternative to APC switched PDUs as we would like to have cord longer than standard APC length of 12 feet.http://www.apc.com/shop/us/en/products/Rack-PDU-Switched-1U-15A-100-120V-8-5-15/P-AP7900BI have checked the EPICS modules page and I have found several other options with existing support, but they all look a bit outdated (based on part numbers on the page and cross-referencing them with current vendor part numbers).Are there other switched PDUs with EPICS support in use besides APC? Thanks, Žiga
-- Bruce Hill Member Technical Staff SLAC National Accelerator Lab 2575 Sand Hill Road M/S 10 Menlo Park, CA 94025