Experimental Physics and
Industrial Control System

Hi,
few months ago I developed an EPICS IOC for ATEN PDU
(PE8208 - metered and switched) using SNMP device support
module (https://groups.nscl.msu.edu/controls/files/devSnmp.html);

source code available here:

	https://github.com/gtortone/ATEN-EPICS

Regards,
Gennaro


On Tue, 9 May 2017, Žiga Oven wrote:

Hi All,

We are looking for alternative to APC switched PDUs as we would like to have cord longer than standard APC length of 12 feet.

http://www.apc.com/shop/us/en/products/Rack-PDU-Switched-1U-15A-100-120V-8-5-15/P-AP7900B

I have checked the EPICS modules page and I have found several other options with existing support, but they all look a bit outdated (based on part numbers on the page and cross-referencing them with current vendor part numbers).

Are there other switched PDUs with EPICS support in use besides APC?

Thanks,

Žiga

--
Gennaro Tortone
INFN Napoli
Italy
tel: +39 81 676169

"Computer Science is no more about computers
    than astronomy is about telescopes."
    - Edsger Dijkstra

Replies:

Re: Switched PDUs with EPICS support Bruce Hill

References:

Switched PDUs with EPICS support Žiga Oven

Navigate by Date:

Prev: Re: Switched PDUs with EPICS support Tom Slejko

Next: RE: AreaDetector bindings and RBV propagation Iain Marcuson

Index: 1994  1995  1996  1997  1998  1999  2000  2001  2002  2003  2004  2005  2006  2007  2008  2009  2010  2011  2012  2013  2014  2015  2016  <2017>  2018  2019  2020  2021  2022  2023  2024 

Navigate by Thread:

Prev: Re: Switched PDUs with EPICS support Tomaž Šuštar

Next: Re: Switched PDUs with EPICS support Bruce Hill

Index: 1994  1995  1996  1997  1998  1999  2000  2001  2002  2003  2004  2005  2006  2007  2008  2009  2010  2011  2012  2013  2014  2015  2016  <2017>  2018  2019  2020  2021  2022  2023  2024