Experimental Physics and
Industrial Control System

Žiga Oven <[email protected]> · Thu, 7 Sep 2017 18:50:45 -0700

Hi All,

Thanks for all your responses.

We have found that we can use the APC PDUs with a standard cord length

but now we face another challenge and that is that the B version of the

desired PDU (like AP7900B [1]) has updated firmware .

Does anybody have EPICS support for this model/FW?

Thanks,

Žiga

[1]

http://www.apc.com/shop/us/en/products/Rack-PDU-Switched-1U-15A-100-120V-8-5-15/P-AP7900B

On 10.5.2017 13:36, Bruce Hill wrote:

Hi Ziga,

We're using snmp to control PDU's from Leviton, iBootBar, and Sentry via

EPICS.

Source code available here:

http://www.slac.stanford.edu/~bhill/epics-pcds/ioc-R3.14.12/common/Leviton/Leviton-R1.28.2.tar.gz

http://www.slac.stanford.edu/~bhill/epics-pcds/modules-R3.14.12/snmp/snmp-R1.1.0-2.7.0.tar.gz

Cheers,
- Bruce

On 05/10/2017 12:06 AM, [email protected] wrote:

Hi,
few months ago I developed an EPICS IOC for ATEN PDU
(PE8208 - metered and switched) using SNMP device support
module (https://groups.nscl.msu.edu/controls/files/devSnmp.html);

source code available here:

    https://github.com/gtortone/ATEN-EPICS

Regards,
Gennaro

On Tue, 9 May 2017, Žiga Oven wrote:

Hi All,

We are looking for alternative to APC switched PDUs as we would like

to have cord longer than standard APC length of 12 feet.

http://www.apc.com/shop/us/en/products/Rack-PDU-Switched-1U-15A-100-120V-8-5-15/P-AP7900B

I have checked the EPICS modules page and I have found several other

options with existing support, but they all look a bit outdated

(based on part numbers on the page and cross-referencing them with

current vendor part numbers).

Are there other switched PDUs with EPICS support in use besides APC?

Thanks,

Žiga

Experimental Physics and Industrial Control System

Experimental Physics and
Industrial Control System