Fly scans are a good example of the need for hardware synchronization
such as pulse outputs or encoders to gain accuracy. It sounds as if you
are trying to push the limit of what can be done through software and
communications interfaces.
On 3/9/2016 1:01 PM, Alireza Panna wrote:
To keep more accurate track of the readout of the motor positions during
fly scans. We are trying to avoid using pulse outputs from the
controllers as well as trying to avoid using encoders.
--
----------------------------------------------------------
Pete R. Jemian, Ph.D. <[email protected]>
Beam line Controls and Data Acquisition, Group Leader
Advanced Photon Source, Argonne National Laboratory
Argonne, IL 60439 630 - 252 - 3189
-----------------------------------------------------------
Education is the one thing for which people
are willing to pay yet not receive.
-----------------------------------------------------------
- References:
- Kohzu motors poll rate issue?? Alireza Panna
- RE: Kohzu motors poll rate issue?? Mark Rivers
- Re: Kohzu motors poll rate issue?? Alireza Panna
- RE: Kohzu motors poll rate issue?? Mark Rivers
- Re: Kohzu motors poll rate issue?? Ron Sluiter
- Re: Kohzu motors poll rate issue?? Alireza Panna
- Navigate by Date:
- Prev:
Re: Kohzu motors poll rate issue?? Henrique Almeida
- Next:
Re: mrfioc2 error at uTCA platform Michael Davidsaver
- Index:
1994
1995
1996
1997
1998
1999
2000
2001
2002
2003
2004
2005
2006
2007
2008
2009
2010
2011
2012
2013
2014
2015
<2016>
2017
2018
2019
2020
2021
2022
2023
2024
- Navigate by Thread:
- Prev:
Re: Kohzu motors poll rate issue?? Henrique Almeida
- Next:
IoC support for Rohde & Schwarz SMA100A Vitor Finotti
- Index:
1994
1995
1996
1997
1998
1999
2000
2001
2002
2003
2004
2005
2006
2007
2008
2009
2010
2011
2012
2013
2014
2015
<2016>
2017
2018
2019
2020
2021
2022
2023
2024
|