Experimental Physics and
Industrial Control System

1994 1995 1996 1997 1998 1999 2000 2001 2002 2003 2004 2005 2006 2007 2008 2009 2010 2011 2012 2013 2014 <2015> 2016 2017 2018 2019 2020 2021 2022 2023 2024	Index	1994 1995 1996 1997 1998 1999 2000 2001 2002 2003 2004 2005 2006 2007 2008 2009 2010 2011 2012 2013 2014 <2015> 2016 2017 2018 2019 2020 2021 2022 2023 2024
<== Date ==>		<== Thread ==>

Subject:	Re: Epics base-3.14.12.5 / RTEMS-4.10 /beatnik compile problem
From:	Michael Westfall <[email protected]>
To:	Andrew Johnson <[email protected]>
Cc:	[email protected]
Date:	Thu, 3 Dec 2015 14:10:49 -0300

Ah, yes. That's what works.

Thank you.

On Thu, Dec 3, 2015 at 1:25 PM, Andrew Johnson <[email protected]> wrote:

That may be what the --enable-std-rtems-installdirs option to configure
does;

Mike Westfall

Gemini Observatory

References:: Epics base-3.14.12.5 / RTEMS-4.10 /beatnik compile problem Michael Westfall; Re: Epics base-3.14.12.5 / RTEMS-4.10 /beatnik compile problem Andrew Johnson; Re: Epics base-3.14.12.5 / RTEMS-4.10 /beatnik compile problem Michael Westfall; Re: Epics base-3.14.12.5 / RTEMS-4.10 /beatnik compile problem Andrew Johnson

Navigate by Date:: Prev: Re: Epics base-3.14.12.5 / RTEMS-4.10 /beatnik compile problem Andrew Johnson; Next: RE: ai RVAL via asyn + modbus: getting unsigned integer jon; Index: 1994 1995 1996 1997 1998 1999 2000 2001 2002 2003 2004 2005 2006 2007 2008 2009 2010 2011 2012 2013 2014 <2015> 2016 2017 2018 2019 2020 2021 2022 2023 2024
Navigate by Thread:: Prev: Re: Epics base-3.14.12.5 / RTEMS-4.10 /beatnik compile problem Andrew Johnson; Next: migration from old EPICS Base Jiro Fujita; Index: 1994 1995 1996 1997 1998 1999 2000 2001 2002 2003 2004 2005 2006 2007 2008 2009 2010 2011 2012 2013 2014 <2015> 2016 2017 2018 2019 2020 2021 2022 2023 2024

ANJ, 16 Dec 2015