Experimental Physics and Industrial Control System
|
Subject: |
Re: Unable to build support modules on Windows, with base 3.15.2 |
From: |
Ben Franksen <[email protected]> |
To: |
<[email protected]> |
Date: |
Tue, 29 Sep 2015 23:28:32 +0200 |
Hi Mark
Am 29.09.2015 um 19:17 schrieb Mark Rivers:
> I have determined that the following changes are required to build
synApps_5_8 on win32-x86.
>
> - seq needs to be updated to seq-2-2-snapshot-2015-05-27. seq-2-2-1
> and seq-2-2-2 do not build on win32-x86. Hopefully there will be a new
> official release of seq soon that builds on win32-x86.
New release for verion 2.1 and 2.2 are imminent (tomorrow, if nothing
untoward happens).
> - The allenBradley, devIocStats, ipac, and seq modules cannot be
built under Windows on a Linux file system
> until the following line is added to configure/RELEASE immediately
following
> the line that defines EPICS_BASE:
> -include $(TOP)/../configure/EPICS_BASE.$(EPICS_HOST_ARCH)
This change has been made in seq, as you suggested, and will appear in
the next releases.
Cheers
Ben
________________________________
Helmholtz-Zentrum Berlin für Materialien und Energie GmbH
Mitglied der Hermann von Helmholtz-Gemeinschaft Deutscher Forschungszentren e.V.
Aufsichtsrat: Vorsitzender Prof. Dr. Dr. h.c. mult. Joachim Treusch, stv. Vorsitzende Dr. Beatrix Vierkorn-Rudolph
Geschäftsführung: Prof. Dr. Anke Rita Kaysser-Pyzalla, Thomas Frederking
Sitz Berlin, AG Charlottenburg, 89 HRB 5583
Postadresse:
Hahn-Meitner-Platz 1
D-14109 Berlin
http://www.helmholtz-berlin.de
- References:
- Unable to build support modules on Windows, with base 3.15.2 Heesterman, Peter J
- RE: Unable to build support modules on Windows, with base 3.15.2 Heesterman, Peter J
- RE: Unable to build support modules on Windows, with base 3.15.2 Mark Rivers
- RE: Unable to build support modules on Windows, with base 3.15.2 Heesterman, Peter J
- RE: Unable to build support modules on Windows, with base 3.15.2 Mark Rivers
- RE: Unable to build support modules on Windows, with base 3.15.2 Heesterman, Peter J
- RE: Unable to build support modules on Windows, with base 3.15.2 Mark Rivers
- Re: Unable to build support modules on Windows, with base 3.15.2 Bob Soliday
- RE: Unable to build support modules on Windows, with base 3.15.2 Mark Rivers
- RE: Unable to build support modules on Windows, with base 3.15.2 Mark S. Engbretson
- Re: Unable to build support modules on Windows, with base 3.15.2 J. Lewis Muir
- Re: Unable to build support modules on Windows, with base 3.15.2 Kevin Peterson
- Re: Unable to build support modules on Windows, with base 3.15.2 J. Lewis Muir
- Re: Unable to build support modules on Windows, with base 3.15.2 Kevin Peterson
- RE: Unable to build support modules on Windows, with base 3.15.2 Mark Rivers
- Re: Unable to build support modules on Windows, with base 3.15.2 Kevin Peterson
- RE: Unable to build support modules on Windows, with base 3.15.2 Mark Rivers
- Navigate by Date:
- Prev:
RE: Serial port COM10: not work? freddie.akeroyd
- Next:
caQtDM new major version Mezger Anton Christian (PSI)
- Index:
1994
1995
1996
1997
1998
1999
2000
2001
2002
2003
2004
2005
2006
2007
2008
2009
2010
2011
2012
2013
2014
<2015>
2016
2017
2018
2019
2020
2021
2022
2023
2024
- Navigate by Thread:
- Prev:
RE: Unable to build support modules on Windows, with base 3.15.2 Mark S. Engbretson
- Next:
Re: Unable to build support modules on Windows, with base 3.15.2 Kevin Peterson
- Index:
1994
1995
1996
1997
1998
1999
2000
2001
2002
2003
2004
2005
2006
2007
2008
2009
2010
2011
2012
2013
2014
<2015>
2016
2017
2018
2019
2020
2021
2022
2023
2024
|
ANJ, 16 Dec 2015 |
·
Home
·
News
·
About
·
Base
·
Modules
·
Extensions
·
Distributions
·
Download
·
·
Search
·
EPICS V4
·
IRMIS
·
Talk
·
Bugs
·
Documents
·
Links
·
Licensing
·
|