Experimental Physics and Industrial Control System
|
I'm relatively new to epics and writing protocols, so please forgive me if I muddle up my terminology.
I'm trying to communicate with a CAEN VME8100 over a network. I would like to be able to read out the various channels and write them into epics to be displayed in an edl panel. I have most of this done, however, I am only reading out integer values. So for example, rather than reading the voltage as 5.23 V I am readding 5 V. It appears that this is not a rounding error, instead I am only reading the first digit of the output.
My protocol calling in the voltage looks something like:
readVMON0 { out "$CMD:MON,CH:0,PAR:VMON"; in "#CMD:OK,VAL:%(PV_NAME.RVAL)f";
RVAL is an integer value. Hence the complaint about not matching the ‘f’ format.You should read into VAL. |
- Replies:
- Re: Only integer value from CAEN VME protocol Christopher Wells Heidt
- References:
- Only integer value from CAEN VME protocol Christopher Wells Heidt
- Navigate by Date:
- Prev:
Only integer value from CAEN VME protocol Christopher Wells Heidt
- Next:
question about process time of streamdevice Silver
- Index:
1994
1995
1996
1997
1998
1999
2000
2001
2002
2003
2004
2005
2006
2007
2008
2009
2010
2011
2012
2013
2014
<2015>
2016
2017
2018
2019
2020
2021
2022
2023
2024
- Navigate by Thread:
- Prev:
Only integer value from CAEN VME protocol Christopher Wells Heidt
- Next:
Re: Only integer value from CAEN VME protocol Christopher Wells Heidt
- Index:
1994
1995
1996
1997
1998
1999
2000
2001
2002
2003
2004
2005
2006
2007
2008
2009
2010
2011
2012
2013
2014
<2015>
2016
2017
2018
2019
2020
2021
2022
2023
2024
|
ANJ, 16 Dec 2015 |
·
Home
·
News
·
About
·
Base
·
Modules
·
Extensions
·
Distributions
·
Download
·
·
Search
·
EPICS V4
·
IRMIS
·
Talk
·
Bugs
·
Documents
·
Links
·
Licensing
·
|