Hi Vishnu,
On 10/31/2014 10:51 AM, Vishnu Patel wrote:
> I am facing problem with waveform record in EPICS 3.15.
> If i use waveform record with single element NELM=1,
> The pv value on camonitor always give zero even though it is non-zero value.
> This was working fine in EPICS3.14.
Please post the evidence that leads you to this conclusion. If possible
please demonstrate it using just the softIoc and the command-line client
programs caget/caput/cainfo/camonitor. I can't see any differences
between the two, but I'm probably not doing the same things you are.
> What extra caution should take for single element waveform record in
> epics 3.15?
There should be no difference between in array channel behaviour between
3.14. and 3.15. There have been some changes to the waveform record, but
they shouldn't affect single-element arrays specifically.
- Andrew
--
People everywhere confuse what they read in newspapers with news.
-- A. J. Liebling
- References:
- waveform with single element Vishnu Patel
- Navigate by Date:
- Prev:
Re: devAsynFloat64::initCommon findInterface asynFloat64Type Pearson, Matthew R.
- Next:
RE: devAsynFloat64::initCommon findInterface asynFloat64Type Heesterman, Peter J
- Index:
1994
1995
1996
1997
1998
1999
2000
2001
2002
2003
2004
2005
2006
2007
2008
2009
2010
2011
2012
2013
<2014>
2015
2016
2017
2018
2019
2020
2021
2022
2023
2024
- Navigate by Thread:
- Prev:
RE: waveform with single element Zelazny, Michael Stanley
- Next:
devAsynFloat64::initCommon findInterface asynFloat64Type Heesterman, Peter J
- Index:
1994
1995
1996
1997
1998
1999
2000
2001
2002
2003
2004
2005
2006
2007
2008
2009
2010
2011
2012
2013
<2014>
2015
2016
2017
2018
2019
2020
2021
2022
2023
2024
|