Experimental Physics and
Industrial Control System

1994 1995 1996 1997 1998 1999 2000 2001 2002 2003 2004 2005 2006 2007 2008 2009 2010 2011 2012 2013 <2014> 2015 2016 2017 2018 2019 2020 2021 2022 2023 2024	Index	1994 1995 1996 1997 1998 1999 2000 2001 2002 2003 2004 2005 2006 2007 2008 2009 2010 2011 2012 2013 <2014> 2015 2016 2017 2018 2019 2020 2021 2022 2023 2024
<== Date ==>		<== Thread ==>

Subject:	waveform with single element
From:	"Vishnu Patel" <[email protected]>
To:	"techtalk" <[email protected]>
Date:	31 Oct 2014 15:51:22 -0000

Hi,

I am facing problem with waveform record in EPICS 3.15.

If i use waveform record with single element NELM=1,

The pv value on camonitor always give zero even though it is non-zero value.

This was working fine in EPICS3.14.

What extra caution should take for single element waveform record in epics 3.15?

With Best Regards

Vishnu

Get your own FREE website, FREE domain & FREE mobile app with Company email.

Replies:: RE: waveform with single element Zelazny, Michael Stanley; Re: waveform with single element Andrew Johnson

Navigate by Date:: Prev: Hytec 8402 DAC memory mode on a TVME200 IP carrier Ron Sluiter; Next: RE: waveform with single element Zelazny, Michael Stanley; Index: 1994 1995 1996 1997 1998 1999 2000 2001 2002 2003 2004 2005 2006 2007 2008 2009 2010 2011 2012 2013 <2014> 2015 2016 2017 2018 2019 2020 2021 2022 2023 2024
Navigate by Thread:: Prev: Hytec 8402 DAC memory mode on a TVME200 IP carrier Ron Sluiter; Next: RE: waveform with single element Zelazny, Michael Stanley; Index: 1994 1995 1996 1997 1998 1999 2000 2001 2002 2003 2004 2005 2006 2007 2008 2009 2010 2011 2012 2013 <2014> 2015 2016 2017 2018 2019 2020 2021 2022 2023 2024

ANJ, 17 Dec 2015