Hi,
For some commands, my device replies with only an "ACK" or "NAK",
no EOS. Streamdevice gets the byte ok, then gets stuck waiting for
more input, but there is no more.
We are "still" using base 3.14.9, asyn 4.10 and streamdevice 2.4.
The replytimeout is set to 900, readtimeout is 100, maxinput is 0.
The problem seems to be asyn not timing out. Could you guys advise
on what I may have missed? Is there a quick fix, instead of upgrading
the whole complex to new versions?
Thanks much and best regards,
Dehong
- Replies:
- RE: streamdevice problem with 1 byte reply Mark Rivers
- Re: streamdevice problem with 1 byte reply Dirk Zimoch
- Navigate by Date:
- Prev:
Software controls position available at W.M. Keck Observatory Kevin Tsubota
- Next:
RE: streamdevice problem with 1 byte reply Mark Rivers
- Index:
1994
1995
1996
1997
1998
1999
2000
2001
2002
2003
2004
2005
2006
2007
2008
2009
2010
<2011>
2012
2013
2014
2015
2016
2017
2018
2019
2020
2021
2022
2023
2024
- Navigate by Thread:
- Prev:
Software controls position available at W.M. Keck Observatory Kevin Tsubota
- Next:
RE: streamdevice problem with 1 byte reply Mark Rivers
- Index:
1994
1995
1996
1997
1998
1999
2000
2001
2002
2003
2004
2005
2006
2007
2008
2009
2010
<2011>
2012
2013
2014
2015
2016
2017
2018
2019
2020
2021
2022
2023
2024
|