On Jul 8, 2010, at 1:59 PM, Andrew Wagner wrote:
> Thanks Nicholas,
>
> The programmers manual for the MSO 4000 can be downloaded from the Tektronix website. Is there more documentation out there for communicating with Tektronix equipment. For instance, the programers manual tells the reader nothing about vxi-11. Your code is the best documentation so far.
Hopefully you won't need to worry about programming at the VXI-11 level. Just use VXI-11 as the messaging platform and base your code on devGpib or StreamDevice to handle the commands/replies.
Tektronix is profoundly unhelpful for programming details other than those provided in the programmer's manual provided with their equpment.,
--
Eric Norum
[email protected]
- References:
- Tekronix and R&S drivers Andrew Wagner
- Re: Tekronix and R&S drivers Nicholas P. DiMonte
- Re: Tekronix and R&S drivers Andrew Wagner
- Navigate by Date:
- Prev:
Re: Tekronix and R&S drivers Nicholas P. DiMonte
- Next:
SNMP & Electrical power grid or generation plant Gorka Ronda
- Index:
1994
1995
1996
1997
1998
1999
2000
2001
2002
2003
2004
2005
2006
2007
2008
2009
<2010>
2011
2012
2013
2014
2015
2016
2017
2018
2019
2020
2021
2022
2023
2024
- Navigate by Thread:
- Prev:
Re: Tekronix and R&S drivers Nicholas P. DiMonte
- Next:
SNMP & Electrical power grid or generation plant Gorka Ronda
- Index:
1994
1995
1996
1997
1998
1999
2000
2001
2002
2003
2004
2005
2006
2007
2008
2009
<2010>
2011
2012
2013
2014
2015
2016
2017
2018
2019
2020
2021
2022
2023
2024
|