We also use the Wiener Crates. In our case we have been installing
Canbus to RS-232 adaptors and David Beauregard has written an asyn
driver. We are using Linux/Moxa based IOC however at that point any
asyn supported RS232 connection should work with the driver.
http://www.acacetus.com/en/products/CANVCCMSpecSheetv1.1.pdf
Elder
----------------
To: EPICS Tech Talk <[email protected]>
Subject: WIENER crate
From: [email protected]
Date: Thu, 15 Nov 2007 13:21:53 +0200
In-reply-to: <[email protected]>
References: <[email protected]> <[email protected]>
<[email protected]>
Hi all,
We are trying to control a VME crate, power supply and the fans via
Epics.
Anyone has a driver already made for this:
the fans UEL 6020E
the crate UEV 6021
UEP 6021
I don't know if I gave all details required, I hope so.
Thank you.
Victor
Name V I Stoica (KVI)
Department/Division Experimentele Kernfysica,KVI
Postal Address Zernikelaan 25
9747AA
Groningen
E-Mail Address [email protected]
- Navigate by Date:
- Prev:
Re: Power Supply Record? Ralph Lange
- Next:
Re: Power Supply Record? Claude Saunders
- Index:
1994
1995
1996
1997
1998
1999
2000
2001
2002
2003
2004
2005
2006
<2007>
2008
2009
2010
2011
2012
2013
2014
2015
2016
2017
2018
2019
2020
2021
2022
2023
2024
- Navigate by Thread:
- Prev:
Anyone have Epics support for ADSC 315r CCD detector? Russ Berg
- Next:
RE: iocLogServer simple browser Jeff Hill
- Index:
1994
1995
1996
1997
1998
1999
2000
2001
2002
2003
2004
2005
2006
<2007>
2008
2009
2010
2011
2012
2013
2014
2015
2016
2017
2018
2019
2020
2021
2022
2023
2024
|