Andrew,
On Thu, 2007-09-27 at 10:48 -0500, Andrew Johnson wrote:
> To tell the client library to only search the control network, set the
> following two environment variables
> EPICS_CA_AUTO_ADDR_LIST=NO
> EPICS_CA_ADDR_LIST=<broadcast address of control subnet>
> The broadcast address is shown on the output from /sbin/ifconfig -a and
> is probably 172.16.4.255 but it may have different numbers in the 3rd or
> 4th positions.
Before I try and for those of us who use non-standard an dmultiple
ports, can I simply set
EPICS_CA_ADDR_LIST="<broadcast>:<port#1> <broadcast>:<port#2>"
?
--
Emmanuel
- Replies:
- RE: same PV on multiple IOC's - side effect Jeff Hill
- References:
- same PV on multiple IOC's - side effect Heinrich du Toit
- Re: same PV on multiple IOC's - side effect Andrew Johnson
- Navigate by Date:
- Prev:
Re: same PV on multiple IOC's - side effect Andrew Johnson
- Next:
RE: same PV on multiple IOC's - side effect Jeff Hill
- Index:
1994
1995
1996
1997
1998
1999
2000
2001
2002
2003
2004
2005
2006
<2007>
2008
2009
2010
2011
2012
2013
2014
2015
2016
2017
2018
2019
2020
2021
2022
2023
2024
- Navigate by Thread:
- Prev:
Re: same PV on multiple IOC's - side effect Andrew Johnson
- Next:
RE: same PV on multiple IOC's - side effect Jeff Hill
- Index:
1994
1995
1996
1997
1998
1999
2000
2001
2002
2003
2004
2005
2006
<2007>
2008
2009
2010
2011
2012
2013
2014
2015
2016
2017
2018
2019
2020
2021
2022
2023
2024
|