Experimental Physics and
Industrial Control System

> We occasionally have gateway problems with old CA-clients running on
> VMS-Systems, but I don't believe this is related to the 
> virtual network interface.
> 

What version of EPICS is used by the VMS systems? Certain older versions of
EPICS are not supported by the portable server embedded in the gateway.
EPICS R3.13 runs on VMS, but a VMS port of R3.14 has not been done to the
best of my knowledge although this is theoretically possible if you have DEC
threads installed. The EPICS build system might even run on VMS if you have
the DEC shell product installed. You will also need the DEC C/C++ product.

Jeff

References:

Re: multiple virtual IOCs with single CA server? Jens Eden

Navigate by Date:

Prev: Re: multiple virtual IOCs with single CA server? Jens Eden

Next: asynDriver R3-2 Marty Kraimer

Index: 1994  1995  1996  1997  1998  1999  2000  2001  2002  2003  <2004>  2005  2006  2007  2008  2009  2010  2011  2012  2013  2014  2015  2016  2017  2018  2019  2020  2021  2022  2023  2024 

Navigate by Thread:

Prev: Re: multiple virtual IOCs with single CA server? Jens Eden

Next: JCA problems-entry point in ca.dll not found daniel funken

Index: 1994  1995  1996  1997  1998  1999  2000  2001  2002  2003  <2004>  2005  2006  2007  2008  2009  2010  2011  2012  2013  2014  2015  2016  2017  2018  2019  2020  2021  2022  2023  2024