> I am thinking of guys like Tom Pelaia, Roland Mueller, Greg White,
> (Andy Goetz?), and someone from Argonne, Jlab, Cosylab...
> Should we pass them the current state and ask them for their comments?
Free - as in beer - and also free - as in widest possible audience - peer
review labor! We will certainly be very grateful for there assistance.
The interfaces I am working on are intended to be concise (good for these
guys also) but pretty low level (perhaps not good for that audience), and so
we will need to decide where the high level stuff needs to be before going
forward with a high level review perhaps. I have no problem with them
looking as the low level stuff as long as we explain that this is a
foundation interface, and that less efficient synchronous interfaces with
built-in (fixed property set) data types will also be supplied.
Jeff
-----Original Message-----
From: Matthias Clausen [mailto:[email protected]]
Sent: Tuesday, June 14, 2005 9:41 AM
To: [email protected]
Subject: meeting in July / ca interface specification
Dear all,
at SLAC we have decided to hold the next meeting at Argonne from 11 to
15th of July.
Does this date still stand?
Does someone already know the precise dates - like i.e. no meeting on
Friday?
I'll have to make plane reservations and get my trip approved.
Thanks :-)
Another issue:
It comes to my mind that the interface for channel access V4 should be
also discussed and defined by those people writing the high level
(machine)physics applications. They will probably have the highest
demand for new features.
I am thinking of guys like Tom Pelaia, Roland Mueller, Greg White, (Andy
Goetz?), and someone from Argonne, Jlab, Cosylab...
Should we pass them the current state and ask them for their comments?
Even though this functionality will be mainly used in EPICS Office
applications I think we should discuss it inside and outside the EPICS
Office framework. Please let me know what you think about it.
Will Kay and Doug coordinate this issue? Otherwise I'll be glad to help.
Looking forward to see you next month.
Regards
Matthias
--
------------------------------------------------------------------------
Matthias Clausen Cryogenic Controls Group(MKS-2)
phone: +49-40-8998-3256 Deutsches Elektronen Synchrotron
fax: +49-40-8994-3256 Notkestr. 85
e-mail: [email protected] 22607 Hamburg
WWW-MKS2.desy.de Germany
------------------------------------------------------------------------
- References:
- meeting in July / ca interface specification Matthias Clausen
- Navigate by Date:
- Prev:
RE: Fundamental Types document Jeff Hill
- Next:
Re: Fundamental Types document Ralph Lange
- Index:
2002
2003
2004
<2005>
2006
2007
2008
2009
2010
2011
2012
2013
2014
2015
2016
2017
2018
2019
2020
2021
2022
2023
2024
- Navigate by Thread:
- Prev:
Re: meeting in July / ca interface specification Kay-Uwe Kasemir
- Next:
Re: meeting in July / ca interface specification Doug Murray
- Index:
2002
2003
2004
<2005>
2006
2007
2008
2009
2010
2011
2012
2013
2014
2015
2016
2017
2018
2019
2020
2021
2022
2023
2024
|