Experimental Physics and Industrial Control System
Hi,
few months ago I developed an EPICS IOC for ATEN PDU
(PE8208 - metered and switched) using SNMP device support
module (https://groups.nscl.msu.edu/controls/files/devSnmp.html);
source code available here:
https://github.com/gtortone/ATEN-EPICS
Regards,
Gennaro
On Tue, 9 May 2017, Žiga Oven wrote:
Hi All,
We are looking for alternative to APC switched PDUs as we would like to have
cord longer than standard APC length of 12 feet.
http://www.apc.com/shop/us/en/products/Rack-PDU-Switched-1U-15A-100-120V-8-5-15/P-AP7900B
I have checked the EPICS modules page and I have found several other options
with existing support, but they all look a bit outdated (based on part
numbers on the page and cross-referencing them with current vendor part
numbers).
Are there other switched PDUs with EPICS support in use besides APC?
Thanks,
Žiga
--
Gennaro Tortone
INFN Napoli
Italy
tel: +39 81 676169
"Computer Science is no more about computers
than astronomy is about telescopes."
- Edsger Dijkstra
- Replies:
- Re: Switched PDUs with EPICS support Bruce Hill
- References:
- Switched PDUs with EPICS support Žiga Oven
- Navigate by Date:
- Prev:
Re: Switched PDUs with EPICS support Tom Slejko
- Next:
RE: AreaDetector bindings and RBV propagation Iain Marcuson
- Index:
1994
1995
1996
1997
1998
1999
2000
2001
2002
2003
2004
2005
2006
2007
2008
2009
2010
2011
2012
2013
2014
2015
2016
<2017>
2018
2019
2020
2021
2022
2023
2024
- Navigate by Thread:
- Prev:
Re: Switched PDUs with EPICS support Tomaž Šuštar
- Next:
Re: Switched PDUs with EPICS support Bruce Hill
- Index:
1994
1995
1996
1997
1998
1999
2000
2001
2002
2003
2004
2005
2006
2007
2008
2009
2010
2011
2012
2013
2014
2015
2016
<2017>
2018
2019
2020
2021
2022
2023
2024