EPICS Home

Experimental Physics and Industrial Control System


 
1994  1995  1996  1997  1998  1999  2000  2001  2002  2003  2004  2005  2006  2007  2008  2009  2010  2011  2012  2013  2014  2015  2016  <20172018  2019  2020  2021  2022  2023  2024  Index 1994  1995  1996  1997  1998  1999  2000  2001  2002  2003  2004  2005  2006  2007  2008  2009  2010  2011  2012  2013  2014  2015  2016  <20172018  2019  2020  2021  2022  2023  2024 
<== Date ==> <== Thread ==>

Subject: Re: LAN asyn connection error
From: Eric Norum <[email protected]>
To: lynn <[email protected]>
Cc: <[email protected]>
Date: Tue, 7 Feb 2017 08:18:19 -0800
As the error message notes, you’re missing the TCP port number to which you wish to connect.  The port number is not optional.

On Feb 6, 2017, at 7:13 PM, lynn <[email protected]> wrote:

drvAsynIPPortConfigure("L0","192.168.1.120",0,0,0)
drvAsynIPPortConfigure: "192.168.1.120" is not of the form "<host>:<port>[:localPort] [protocol]"



Replies:
Re: LAN asyn connection error Ron Sluiter
References:
LAN asyn connection error lynn

Navigate by Date:
Prev: Re: How to support a new stepper motor controller? Pete Jemian
Next: Re: LAN asyn connection error Ron Sluiter
Index: 1994  1995  1996  1997  1998  1999  2000  2001  2002  2003  2004  2005  2006  2007  2008  2009  2010  2011  2012  2013  2014  2015  2016  <20172018  2019  2020  2021  2022  2023  2024 
Navigate by Thread:
Prev: LAN asyn connection error lynn
Next: Re: LAN asyn connection error Ron Sluiter
Index: 1994  1995  1996  1997  1998  1999  2000  2001  2002  2003  2004  2005  2006  2007  2008  2009  2010  2011  2012  2013  2014  2015  2016  <20172018  2019  2020  2021  2022  2023  2024