Argonne National Laboratory

Experimental Physics and
Industrial Control System

1994  1995  1996  1997  1998  1999  2000  2001  2002  2003  2004  2005  2006  2007  2008  2009  2010  2011  2012  2013  2014  2015  2016  <2017 Index 1994  1995  1996  1997  1998  1999  2000  2001  2002  2003  2004  2005  2006  2007  2008  2009  2010  2011  2012  2013  2014  2015  2016  <2017
<== Date ==> <== Thread ==>

Subject: Re: LAN asyn connection error
From: Ron Sluiter <sluiter@aps.anl.gov>
To: Eric Norum <eric@norum.ca>, lynn <lynn0703@yeah.net>
Cc: <tech-talk@aps.anl.gov>
Date: Tue, 7 Feb 2017 10:24:18 -0600
Hello Lynn,

Eric got this just before I could respond...
Let me add; Always look for the 1st error message in the startup script.

Ron

On 2/7/2017 10:18 AM, Eric Norum wrote:
As the error message notes, you’re missing the TCP port number to which you wish to connect.  The port number is not optional.

On Feb 6, 2017, at 7:13 PM, lynn <lynn0703@yeah.net> wrote:

drvAsynIPPortConfigure("L0","192.168.1.120",0,0,0)
drvAsynIPPortConfigure: "192.168.1.120" is not of the form "<host>:<port>[:localPort] [protocol]"




References:
LAN asyn connection error lynn
Re: LAN asyn connection error Eric Norum

Navigate by Date:
Prev: Re: LAN asyn connection error Eric Norum
Next: RE: How to support a new stepper motor controller? Mark Rivers
Index: 1994  1995  1996  1997  1998  1999  2000  2001  2002  2003  2004  2005  2006  2007  2008  2009  2010  2011  2012  2013  2014  2015  2016  <2017
Navigate by Thread:
Prev: Re: LAN asyn connection error Eric Norum
Next: How to support a new stepper motor controller? Ralph Lange
Index: 1994  1995  1996  1997  1998  1999  2000  2001  2002  2003  2004  2005  2006  2007  2008  2009  2010  2011  2012  2013  2014  2015  2016  <2017
ANJ, 14 Feb 2017 Valid HTML 4.01! · Home · News · About · Base · Modules · Extensions · Distributions · Download ·
· EPICS V4 · IRMIS · Talk · Bugs · Documents · Links · Licensing ·