Experimental Physics and
Industrial Control System

"भावना नितिन मेढ़" <[email protected]> · Thu, 24 Nov 2016 13:41:59 +0530

Hi,
Server: Centos6.5 Target: MVME5500 RTEMS 4.9.2

Server IP:100.100.100.110

Target IP:100.100.100.101

I am facing problem in nfsmount. The error is given below.

MVME5500> go -a04000000
-----------------------------------------
Welcome to rtems-4.9.2(PowerPC/Generic (classic FPU)/mvme5500) on
MVME5500-0163
-----------------------------------------
Now BSP_mem_size = 0x1FE00000
rtems_configuration_get_work_space_size() = 1F4000
Universe II PCI-VME bridge detected at 0x82000000, IRQ 12
Universe Master Ports:
Port  VME-Addr   Size       PCI-Adrs   Mode:
0:    0x20000000 0x0E000000 0x90000000 A32, D64 [MBLT], Dat, Sup
1:    0x00000000 0x00FF0000 0x9F000000 A24, D64 [MBLT], Dat, Sup
2:    0x00000000 0x00010000 0x9FFF0000 A16, D64, Dat, Sup
Universe Slave Ports:
Port  VME-Addr   Size       PCI-Adrs   Mode:
0:    0x90000000 0x1FE00000 0x00000000 A32, Pgm, Dat, Sup, Usr, PWEN, PREN
Overriding main IRQ line PCI info with 76
Registering /dev/console as minor 0 (==/dev/ttyS0)

***** Initializing network *****
Startup.

Ethernet driver name wmG unit 1
Copyright (c) 2004,2005 S. Kate Feng <[email protected]> (RTEMS/mvme5500 port)
***** Initializing NFS *****
RTEMS-RPCIOD $Release$, Till Straumann, Stanford/SLAC/SSRL 2002, See
LICENSE fi.
RTEMS-NFS $Release$, Till Straumann, Stanford/SLAC/SSRL 2002, See LICENSE
file .
Trying to mount 100.100.100.110:/tftpboot/rt_test2 on /rt_test2
RPCIO: server '100.100.100.110' not responding - still trying
RPCIO: server '100.100.100.110' not responding - still trying
RPCIO: server '100.100.100.110' not responding - still trying
Unable to contact NFS server - invalid port? (RPC: Timed out)
nfsMount - mount: Unknown protocol
rtems_bsdnet_get_ntp() Can't send: Host is down
rtems_bsdnet_get_ntp() Can't send: Host is down
***** Starting EPICS application *****
Can't open /rt_test2/st.cmd: No such file or directory
100.100.100.101>

I have checked the nfs service on my server. It is working fine, as when I
connect it to some other PC to and mount a directory, it is successful.

What does the prompt 100.100.100.101> mean?

Regards,
Bhavna

**************************************************
Bhavna N. Merh/भावना नितिन मेढ़
Scientific Officer,
Accelerator Controls Section
Raja Ramanna Centre For Advanced Technology(RRCAT)
Indore (MP)-452013 India
Phone:+91 731 244 2197
Fax : +91 731 244 2100
email: [email protected]
*************************************************                         
पॉलिथीन के लिये ना कहिये/ Refuse Polythene
*************************************************

Experimental Physics and Industrial Control System

Experimental Physics and
Industrial Control System