Experimental Physics and
Industrial Control System

1994 1995 1996 1997 1998 1999 2000 2001 2002 2003 2004 2005 2006 2007 2008 2009 2010 2011 2012 2013 2014 2015 <2016> 2017 2018 2019 2020 2021 2022 2023 2024	Index	1994 1995 1996 1997 1998 1999 2000 2001 2002 2003 2004 2005 2006 2007 2008 2009 2010 2011 2012 2013 2014 2015 <2016> 2017 2018 2019 2020 2021 2022 2023 2024
<== Date ==>		<== Thread ==>

Subject:	device support for Oxigraf oxygen monitor
From:	"Sinclair, John William" <[email protected]>
To:	"[email protected]" <[email protected]>
Date:	Fri, 19 Aug 2016 19:43:18 +0000

Does anyone have any experience doing Modbus communication with an Oxigraf O2iM device?

If so, could you provide comments on the following:

1) Reliability. Does it continue working for long periods of time? Few or many communication errors?

2) Did you have to modify or extend the stock EPICS Modbus support in any manner?

Thanks,

John Sinclair

Navigate by Date:: Prev: Re: Andrew Johnson; Next: EPICS and TIA Portal communication elena.hidalgo; Index: 1994 1995 1996 1997 1998 1999 2000 2001 2002 2003 2004 2005 2006 2007 2008 2009 2010 2011 2012 2013 2014 2015 <2016> 2017 2018 2019 2020 2021 2022 2023 2024
Navigate by Thread:: Prev: Re: MEDM Bob Soliday; Next: EPICS and TIA Portal communication elena.hidalgo; Index: 1994 1995 1996 1997 1998 1999 2000 2001 2002 2003 2004 2005 2006 2007 2008 2009 2010 2011 2012 2013 2014 2015 <2016> 2017 2018 2019 2020 2021 2022 2023 2024

ANJ, 22 Aug 2016