Argonne National Laboratory

Experimental Physics and
Industrial Control System

1994  1995  1996  1997  1998  1999  2000  2001  2002  2003  2004  2005  2006  2007  2008  2009  2010  2011  2012  2013  2014  <20152016  2017  Index 1994  1995  1996  1997  1998  1999  2000  2001  2002  2003  2004  2005  2006  2007  2008  2009  2010  2011  2012  2013  2014  <20152016  2017 
<== Date ==> <== Thread ==>

Subject: RE: Building SEQ 2.2.3, Windows, EPICS Base 3-15-2
From: "Madden, Timothy J." <tmadden@aps.anl.gov>
To: Ben Franksen <benjamin.franksen@helmholtz-berlin.de>, "tech-talk@aps.anl.gov" <tech-talk@aps.anl.gov>
Date: Fri, 2 Oct 2015 22:07:05 +0000
Thanks Ben

I saw a note from Kevin Peterson that I should be using VS 2010 and not VS2015 because several other synApps modules will  not build... I had been using VS2008 forever, but it lacks modern C++ etc. VS2010 lacks modern C++ for that matter as well...

I can't get it to build with VS2015 so I am trying VS2010. It is now harder to find on the internet, and comes as a *.iso, which needs a special tool do even mount it on windows 7. So many wrinkles.



Thanks for the response. Have a good weekend.

T
 
________________________________________
From: Ben Franksen [benjamin.franksen@helmholtz-berlin.de]
Sent: Friday, October 02, 2015 4:55 PM
To: Madden, Timothy J.; tech-talk@aps.anl.gov
Subject: Re: Building SEQ 2.2.3, Windows, EPICS Base 3-15-2

Am 02.10.2015 um 23:20 schrieb Madden, Timothy J.:
> Dear EPICS:
>
> Trying to build seq 2.2.3 with epics base 3.15.2. I am using the windows
> 2015 compiler on a 64 bit machine.
> I am building in 64 bit mode.
>
> I saw some tech talk notes that this does not work?

The latest release 2.2.3 should build correctly on Windows. You can even
run the test suite. Mark even attested that this is the case on
tech-talk. The comment you refer to was written before 2.2.3 was released.

> Mark R. says one can make this work with 2.2.x snapshot etc. etc. I
> don't know where to get this. it is not on the seq web site.

It is:
http://www-csr.bessy.de/control/SoftDist/sequencer/Installation.html#download
contains a link to the latest snapshot
(http://www-csr.bessy.de/control/SoftDist/sequencer/releases/seq-2-2-snapshot-latest.tar.gz).
However, you no longer need to use a snapshot.

Cheers
Ben

________________________________

Helmholtz-Zentrum Berlin für Materialien und Energie GmbH

Mitglied der Hermann von Helmholtz-Gemeinschaft Deutscher Forschungszentren e.V.

Aufsichtsrat: Vorsitzender Prof. Dr. Dr. h.c. mult. Joachim Treusch, stv. Vorsitzende Dr. Beatrix Vierkorn-Rudolph
Geschäftsführung: Prof. Dr. Anke Rita Kaysser-Pyzalla, Thomas Frederking

Sitz Berlin, AG Charlottenburg, 89 HRB 5583

Postadresse:
Hahn-Meitner-Platz 1
D-14109 Berlin

http://www.helmholtz-berlin.de


Replies:
Re: Building SEQ 2.2.3, Windows, EPICS Base 3-15-2 Ben Franksen
References:
Building SEQ 2.2.3, Windows, EPICS Base 3-15-2 Madden, Timothy J.
Re: Building SEQ 2.2.3, Windows, EPICS Base 3-15-2 Ben Franksen

Navigate by Date:
Prev: Re: Building SEQ 2.2.3, Windows, EPICS Base 3-15-2 Ben Franksen
Next: RE: Building SEQ 2.2.3, Windows, EPICS Base 3-15-2 Madden, Timothy J.
Index: 1994  1995  1996  1997  1998  1999  2000  2001  2002  2003  2004  2005  2006  2007  2008  2009  2010  2011  2012  2013  2014  <20152016  2017 
Navigate by Thread:
Prev: Re: Building SEQ 2.2.3, Windows, EPICS Base 3-15-2 Ben Franksen
Next: Re: Building SEQ 2.2.3, Windows, EPICS Base 3-15-2 Ben Franksen
Index: 1994  1995  1996  1997  1998  1999  2000  2001  2002  2003  2004  2005  2006  2007  2008  2009  2010  2011  2012  2013  2014  <20152016  2017 
ANJ, 16 Dec 2015 Valid HTML 4.01! · Home · News · About · Base · Modules · Extensions · Distributions · Download ·
· EPICS V4 · IRMIS · Talk · Bugs · Documents · Links · Licensing ·