On 12/03/2014 09:09 AM, Dudley, David wrote:
> Does that imply that converting from the 3.14 format to 3.15 prevents the software from being used on 3.14 in the future?
It shouldn't and I would consider it a bug if it were. Of course it
worst this means selecting between two .dbd files at build time.
In this instance the issue is that the BACNet module is including as.dbd
instead of asSupport.dbd, and thus pulling in two definitions of all the
Base record types.
> Context: recordtype(calcout) in file '/home/dudleyd/R3.15.1/dbd/as.dbd' in recordtype(transform) in file '/home/dudleyd/R3.15.1/dbd/transformRecord.dbd' in recordtype(scalcout) in file '/home/dudleyd/R3.15.1/dbd/sCalcoutRecord.dbd' in recordtype(acalcout) in file '/home/dudleyd/R3.15.1/dbd/aCalcoutRecord.dbd' in file '/home/dudleyd/R3.15.1/dbd/calcSupport.dbd'
> while reading 'as.dbd' to create 'BACNetApp.dbd'
@Andrew, this message is approaching C++ template levels of hard-to-read.
- References:
- EPICS 3.15.1 Dudley, David
- FW: EPICS 3.15.1 Dudley, David
- Navigate by Date:
- Prev:
FW: EPICS 3.15.1 Dudley, David
- Next:
RE: EPICS 3.15.1 Dudley, David
- Index:
1994
1995
1996
1997
1998
1999
2000
2001
2002
2003
2004
2005
2006
2007
2008
2009
2010
2011
2012
2013
<2014>
2015
2016
2017
2018
2019
2020
2021
2022
2023
2024
- Navigate by Thread:
- Prev:
FW: EPICS 3.15.1 Dudley, David
- Next:
RE: FW: EPICS 3.15.1 Dudley, David
- Index:
1994
1995
1996
1997
1998
1999
2000
2001
2002
2003
2004
2005
2006
2007
2008
2009
2010
2011
2012
2013
<2014>
2015
2016
2017
2018
2019
2020
2021
2022
2023
2024
|