Experimental Physics and
Industrial Control System

"भावना न��तिन मेढ़" <[email protected]> · Sun, 3 Aug 2014 10:37:08 +0530

Hi Mark,
Initially we would like to just put/port/load the EPICS core  on Vxworks
running on Target Board - MVME-5500 with PowerPC 7447 processor. The we
would like run a  simple IOC with few records. Later on we will proceed to
read the I/O cards etc. Yes, we use synapps and asyn, but on linux based
PC right now for some other application.
Any suggestions will be of great help.

Rgds,
Bhavna

> Hi Amit,
>
> What is your application for EPICS?
>
> You might be interested in knowing about the EPICS "synApps" package.  It
> provides drivers for many devices like motors, counters, etc. plus
> additional useful records.
>
> http://www.aps.anl.gov/bcda/synApps/
>
> synApps uses some other useful modules like asyn:
>
> http://www.aps.anl.gov/epics/modules/soft/asyn/
>
> and StreamDevice
>
> http://epics.web.psi.ch/software/streamdevice/doc/
>
> Mark
>
>
>
> -----Original Message-----
> From: Amit Chauhan [mailto:[email protected]]
> Sent: Friday, August 01, 2014 8:11 AM
> To: Mark Rivers; 'Dirk Zimoch'; 'Eric Norum'
> Cc: 'Bhavna Merh'; [email protected]
> Subject: RE: EPICS on VxWorks6.9
>
> Hi,
>
> I made a couple of changes in the 'stdio.h' file in WindRiver
> installation.
>
> After that the make process completed successfully without any errors.
> Thus it seems that EPICS base has got compiled for VxWorks 6.9
>
> Now we seek suggestions as to how to proceed further from this point as in
> integrating EPICS with VxWorks Image and building applications that makes
> use of EPICS features.
>
> Thanks & Regards,
> Amit.
>
> -----Original Message-----
> From: Mark Rivers [mailto:[email protected]]
> Sent: Wednesday, July 30, 2014 6:28 PM
> To: Amit Chauhan; 'Dirk Zimoch'; 'Eric Norum'
> Cc: 'Bhavna Merh'; [email protected]
> Subject: RE: EPICS on VxWorks6.9
>
> Hi Amit,
>
> I am confused.  In your previous post the error message was:
>
> ***************************************************************
> But now the make process is stopping with following errors related to a
> file
> named 'epicsSingleton.h' :
>
> base-3-14-12-4\\include
> ..\\..\\..\\src\\libCom\\cxxTemplates\\epicsOnce.cpp
> epicsOnce.cpp
> ..\..\..\src\libCom\cxxTemplates\epicsSingleton.h(37) : error C2039:
> 'size_t' : is not a member of 'std'
> ..\..\..\src\libCom\cxxTemplates\epicsSingleton.h(82) : error C2955:
> 'epicsSingleton' : use of class template requires template argument list
>         ..\..\..\src\libCom\cxxTemplates\epicsSingleton.h(78) : see
> declaration of 'epicsSingleton'%0

Experimental Physics and Industrial Control System

Experimental Physics and
Industrial Control System