Experimental Physics and
Industrial Control System

Jack <[email protected]> · Tue, 18 Feb 2014 08:30:40 +0100

Dear Emmanuel,

we are talking about the regulation of the current on the magnets, many

times they have to be regulated in couple.

The operator has requested one knob per magnet, plus other two knobs to

adjust the scales. They want this because they adjust the current

looking other instruments (..old real analog instruments).

We are a small lab with limited man-power therefore I'm looking to a

COTS solution but integrated with EPICS.

>>>>"To me, the problem you describe is in large part due to wrong UI

design."

I'm in the process to design many UI, please feel free to point me out

the docs/books/urls to learn more on this topic.

Thank you very much.
-Mauro

~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Mauro Giacchini

Istituto Nazionale di Fisica Nucleare - Laboratori Nazionali di Legnaro
V.le dell'Universita', 2
35020 LEGNARO (PD) - ITALY
Tel./Fax. +39.049.8068558

EPICS _at_ LNL http://www.lnl.infn.it/~epics/

...the first EPICS installation to the project SPES realized from the
scratch in ITALY is in production since begin 2010!!

~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

On 2/17/2014 9:37 PM, Emmanuel Mayssat wrote:

"how do I want to interact with the 'system'?"

The answer you will find there is likely to be specific to your case

at hand.

Therefore for a more detailed answer, you probably will need to share

more of the details of what you are trying.

What do you want to set through those knobs? How many knobs do your

need? Where is the user? etc.

---
This email is free from viruses and malware because avast! Antivirus protection is active.
http://www.avast.com

Experimental Physics and Industrial Control System

Experimental Physics and
Industrial Control System