Experimental Physics and Industrial Control System
I've never tried that. I'd put it in myFunc.c then add that to my Makefile. Example:
myApp_SRCS += myFunc.c
________________________________________
From: Pierrick Hanlet [[email protected]]
Sent: Wednesday, December 19, 2012 4:37 PM
To: Zelazny, Michael Stanley
Cc: [email protected]
Subject: Re: SNL with C
Great! Thank you and Mark.
Another question: if I want to write a C function, I understand that it needs to be
after the last SNL statement. Does it belong outside of the ss SS1 {} block, or
is it after the last statement within the block. Is it true that this code would
also need to be escaped %{ short myFunc() {} }%?
Best regards,
Pierrick
On 12/19/2012 06:11 PM, Zelazny, Michael Stanley wrote:
try putting your statement in an "entry" block. And, as Mark says, the "%%" probably isn't necessary.
ss SS1 {
state Offline {
/* Get PV relevent PV information */
when (SS1mon == 1) {
SS1state = 1;
pvPut(SS1state);
} state Pumping
}
state Pumping {
/* Get PV relevent PV information */
entry {
%%if (StateReadCDB()) printf("SS1-Pumping: success\");
}
when (SS1vac <= 1.0e-4) {
SS1state = 2;
pvPut(SS1state);
} state Pumped_Warm
}
... continued
}
________________________________________
From: [email protected]<mailto:[email protected]> [[email protected]<mailto:[email protected]>] On Behalf Of Pierrick M Hanlet [[email protected]<mailto:[email protected]>]
Sent: Wednesday, December 19, 2012 3:59 PM
To: [email protected]<mailto:[email protected]>
Subject: SNL with C
Hi,
I a newcomer to SNL.
I have a library to which I link my snl. In a global entrance block, I can successfully call
one of the functions. Later I added the use of another function in a state set and now
I can no longer compile.
ss SS1 {
state Offline {
/* Get PV relevent PV information */
when (SS1mon == 1) {
SS1state = 1;
pvPut(SS1state);
} state Pumping
}
state Pumping {
/* Get PV relevent PV information */
%%if (StateReadCDB()) printf("SS1-Pumping: success\");
when (SS1vac <= 1.0e-4) {
SS1state = 2;
pvPut(SS1state);
} state Pumped_Warm
}
... continued
}
The error at compilation/linking is:
converting ../sncMICEStates.stt
/home/epics/epics/Support/seq/bin/linux-x86/snc +r ../sncMICEStates.stt -o sncMICEStates.c.tmp
syntax error: line no. 96 (../sncMICEStates.stt)
state option list
make[3]: *** [sncMICEStates.c] Error 1
make[3]: Leaving directory `/home/epics/epics/iocTops/MICEStates/MICEStatesApp/src/O.linux-x86'
make[2]: *** [install.linux-x86] Error 2
make[2]: Leaving directory `/home/epics/epics/iocTops/MICEStates/MICEStatesApp/src'
make[1]: *** [src.install] Error 2
make[1]: Leaving directory `/home/epics/epics/iocTops/MICEStates/MICEStatesApp'
make: *** [MICEStatesApp.install] Error 2
where line no. 96 is the escaped call to the library function in my Pumping state. The error "state option list"
doesn't tell me anything.
Help please,
Pierrick
"Whether you think you can or think you can't, either way, you are correct"
-- Henry Ford
_________________________________________________________________________
Pierrick Hanlet
IIT/Fermilab
+1-630-697-8758 (FNAL)
+1-312-567-5745 (IIT)
+1-630-697-8758/+44-7-948-860-1978 (US/UK mobile)
--
"Whether you think you can or think you can't, either way, you are correct" -- Henry Ford
_______________________________________________________________
Pierrick Hanlet
IIT/Fermilab
+1-630-840-5555 (FNAL)
+1-312-567-5745 (IIT)
+1-630-697-8758/+44-79-48-860-197 (US/UK mobile)
- References:
- SNL with C Pierrick M Hanlet
- RE: SNL with C Zelazny, Michael Stanley
- Re: SNL with C Pierrick Hanlet
- Navigate by Date:
- Prev:
Re: SNL with C Pierrick Hanlet
- Next:
RE: SNL with C Mark Rivers
- Index:
1994
1995
1996
1997
1998
1999
2000
2001
2002
2003
2004
2005
2006
2007
2008
2009
2010
2011
<2012>
2013
2014
2015
2016
2017
2018
2019
2020
2021
2022
2023
2024
- Navigate by Thread:
- Prev:
Re: SNL with C Pierrick Hanlet
- Next:
RE: structs and SNL Zelazny, Michael Stanley
- Index:
1994
1995
1996
1997
1998
1999
2000
2001
2002
2003
2004
2005
2006
2007
2008
2009
2010
2011
<2012>
2013
2014
2015
2016
2017
2018
2019
2020
2021
2022
2023
2024