EPICS Home

Experimental Physics and Industrial Control System


 
1994  1995  1996  1997  1998  1999  2000  2001  2002  2003  2004  2005  2006  2007  2008  2009  2010  2011  <2012>  2013  2014  2015  2016  2017  2018  2019  2020  2021  2022  2023  2024  Index 1994  1995  1996  1997  1998  1999  2000  2001  2002  2003  2004  2005  2006  2007  2008  2009  2010  2011  <2012>  2013  2014  2015  2016  2017  2018  2019  2020  2021  2022  2023  2024 
<== Date ==> <== Thread ==>
Subject: Re: epicsAtExit
From: Andrew Johnson <[email protected]>
To: [email protected]
Date: Thu, 28 Jun 2012 13:28:40 -0500 
Hi Zen,

On 2012-06-28 Szalata, Zenon M. wrote:
> I don't see the printf message in the console output.  I see no evidence
> that rebootCB() is called.

Does your vxWorks BSP provide the sysAtReboot() function that EPICS uses to 
register the reboot callbacks?  If not you'll see this message during booting, 
probably while loading the IOC's .munch file:

    BSP routine sysAtReboot() not found, epicsExit() will not be
    called by reboot.  For reduced functionality, call
        rebootHookAdd(epicsExitCallAtExits)

If you see that, follow its advice and see whether that solves the problem.

- Andrew
-- 
Never interrupt your enemy when he is making a mistake.
-- Napoleon Bonaparte
Replies:
RE: epicsAtExit Szalata, Zenon M.
References:
epicsAtExit Szalata, Zenon M.
RE: epicsAtExit Mark Rivers
RE: epicsAtExit Szalata, Zenon M.
Navigate by Date:
Prev: RE: epicsAtExit Mark Rivers
Next: RE: epicsAtExit Szalata, Zenon M.
Index: 1994  1995  1996  1997  1998  1999  2000  2001  2002  2003  2004  2005  2006  2007  2008  2009  2010  2011  <2012>  2013  2014  2015  2016  2017  2018  2019  2020  2021  2022  2023  2024 
Navigate by Thread:
Prev: RE: epicsAtExit Szalata, Zenon M.
Next: RE: epicsAtExit Szalata, Zenon M.
Index: 1994  1995  1996  1997  1998  1999  2000  2001  2002  2003  2004  2005  2006  2007  2008  2009  2010  2011  <2012>  2013  2014  2015  2016  2017  2018  2019  2020  2021  2022  2023  2024