Re: carrier card Hy8002 error

[jim.chen@hytec-electronics.co.uk]

Hi Huili,

It looks like you either loaded the same ioc twice or loaded two  
devices with the same address (same vme  slot number). Please check  
all your st.cmd files.
Regards,

Jim




Quoting jim.chen@hytec-electronics.co.uk:

> Hi Huili,
>
> From the printout it looks like you might have loaded two IOCs at the
> same time. If you can check the generic start-up st.cmd file (maybe
> under the localhome folder for example) , you might find two entries
> there. If there are more than one, commenting out one will solve the
> problem.
>
> Best regards,
>
> Jim
>
> Hytec Electronics Ltd
>
>
>
>
>
>
> Quoting huili <lifang@ihep.ac.cn>:
>
> > My ioc download message about Hy8002 as this:
> >
> >
> >
> > IPAC3 = ipacAddHy8002("9,2")
> >
> > filename="../../../src/libCom/osi/devLib.c" line number=373
> >
> > Specified device address overlaps another device    VME A16 0X00004C00 -
> > OX00004C9F Requested by drvHy8002filename="../../../src/libCom/osi/devLib.c"
> > line number=399
> >
> > This device already owns the address range    VME A16 0X00004C00 -
> > 0X00004C9F Owned by drvHy8002ipacAddCarrier: Hytec VICB8002 driver returned
> > an error.
> >
> > IPAC3 = 0x1e3ee420: value = 39321603 = 0x2580003
> >
> >
> >
> > I don't know how to so ,Please give me a soluton!
> >
> > Best wishes!
>
>
> ----------------------------------------------------------------
> This message was sent using IMP, the Internet Messaging Program.


----------------------------------------------------------------
This message was sent using IMP, the Internet Messaging Program.