Experimental Physics and
Industrial Control System

[email protected] · Mon, 26 Mar 2012 23:24:25 +0100

Hi Huili,

From the printout it looks like you might have loaded two IOCs at the

same time. If you can check the generic start-up st.cmd file (maybe

under the localhome folder for example) , you might find two entries

there. If there are more than one, commenting out one will solve the

problem.

Best regards,

Jim

Hytec Electronics Ltd

Quoting huili <[email protected]>:

My ioc download message about Hy8002 as this:

IPAC3 = ipacAddHy8002("9,2")

filename="../../../src/libCom/osi/devLib.c" line number=373

Specified device address overlaps another device    VME A16 0X00004C00 -
OX00004C9F Requested by drvHy8002filename="../../../src/libCom/osi/devLib.c"
line number=399

This device already owns the address range    VME A16 0X00004C00 -
0X00004C9F Owned by drvHy8002ipacAddCarrier: Hytec VICB8002 driver returned
an error.

IPAC3 = 0x1e3ee420: value = 39321603 = 0x2580003

I don't know how to so ,Please give me a soluton!

Best wishes!

----------------------------------------------------------------
This message was sent using IMP, the Internet Messaging Program.

Experimental Physics and Industrial Control System

Experimental Physics and
Industrial Control System