1994 1995 1996 1997 1998 1999 2000 2001 2002 2003 2004 2005 2006 2007 2008 2009 2010 2011 <2012> 2013 2014 2015 2016 2017 2018 2019 2020 2021 2022 2023 2024 | Index | 1994 1995 1996 1997 1998 1999 2000 2001 2002 2003 2004 2005 2006 2007 2008 2009 2010 2011 <2012> 2013 2014 2015 2016 2017 2018 2019 2020 2021 2022 2023 2024 |
<== Date ==> | <== Thread ==> |
---|
Subject: | RE: SmarAct / SmarPod |
From: | Emma Shepherd <[email protected]> |
To: | "Gofron, Kazimierz" <[email protected]>, EPICS Tech Talk <[email protected]> |
Cc: | "[email protected]" <[email protected]>, "[email protected]" <[email protected]> |
Date: | Tue, 13 Mar 2012 13:15:19 +1100 |
Hi Gofron, As you might have gathered if your e-mail bounced, I’m not currently working at Diamond (I’ve moved to the Australian synchrotron) – but I did notice your message on tech-talk. I’m forwarding it to Lee and Paul who are still at Diamond and might be better able to answer your question.... Lee/Paul – please could you give us an update on the performance with the SDC controller? Thanks, Emma From: [email protected] [mailto:[email protected]] On Behalf Of Gofron, Kazimierz Ernest and Emma, We are considering purchase of the SmarPod as well, and deciding on the control. Were you able to control SmarPod using DeltaTau and SDC (step and direction) control with the same precision as MCS controller? Or did you decide on MCS RS-232 / USB control? If you are using the MCS, did you develop EPICS driver? Regards, Kazimierz Gofron NSLS-II Brookhaven National Laboratory (p) +1 (631) 344 5283 (f) +1 (631) 344 8085
[email protected] wrote: Hi Ernest,
We decided to buy the SDC (step and direction) controller in the end, which we can control directly from our Delta Tau hardware. What is the overall experience with Delta Tau? Have you standardize on Delta Tau for all of your motion control needs.?
However we've been having some problems with repeatability, so we might be looking into other options - the MCS RS-232 controller could be a possibility. Let us know how you get on. Thanks for the information. We will also investigate the IMS solution implemented by our colleagues that support Photon Controls and Data Acquisition at LCLS. The are using MForce Drive/Controller which interface to RS422/RS485. http://imshome.com/products/mforce_powerdrive_mfi.html
Cheers, Ernest
Cheers, Emma
-----Original Message----- From: Ernest L. Williams Jr. [mailto:[email protected]] Sent: 11 July 2011 21:16 To: Shepherd, Emma (DLSLtd,RAL,DIA) Cc: [email protected] Subject: Re: SmarAct positioner control system
[email protected] wrote: Hi all,
I haven't found anything on the EPICS website, but thought it was worth asking just in case. Has anybody come across any EPICS support for the SmarAct MCS (Modular Control System)? It uses an RS-232 interface to control 3 positioners with sensor feedback.
Hi, We are also interested in the SmarAct as well. We are looking at the "MCS-3C-IDS, RS-232 Interface"
The idea is to add this support to the motor support package via asynPortDriver
Thanks, Ernest
Thanks, Emma
This message and any attachments may contain proprietary or confidential information. If you are not the intended recipient or you received the message in error, you must not use, copy or distribute the message. Please notify the sender immediately and destroy the original message. Thank you. |