We are using CAMAC for "slow" controls.
Ethernet -> Agilent E5810A GPIB -> KS3988 CAMAC Crate Controller.
This is neither serial nor parallel CAMAC highway; it is GPIB.
Originally, this was used with LabVIEW and lately I have created an EPICS device driver
which is sub-classed from asynPortDriver class.
Zen
> -----Original Message-----
> From: [email protected] [mailto:[email protected]]
> On Behalf Of Paul Sichta
> Sent: Monday, January 09, 2012 9:10 AM
> To: [email protected]
> Subject: Any CAMAC users left?
>
> Our NSTX experiment (unfortunately) continues to use CAMAC. Our
> MVME-177 and Hytec VSD 2992 hardware has served us well and are ready
> to be retired and replaced with new hardware. I'd be interested to
> hear what people are using to drive their CAMAC serial highways. I
> asked a couple of years ago too, just looking for any updates.
>
> -- Paul Sichta
- References:
- Any CAMAC users left? Paul Sichta
- Navigate by Date:
- Prev:
RE: Any CAMAC users left? Graham Cross
- Next:
Re: Any CAMAC users left? Matt Bickley
- Index:
1994
1995
1996
1997
1998
1999
2000
2001
2002
2003
2004
2005
2006
2007
2008
2009
2010
2011
<2012>
2013
2014
2015
2016
2017
2018
2019
2020
2021
2022
2023
2024
- Navigate by Thread:
- Prev:
RE: Any CAMAC users left? Graham Cross
- Next:
Re: Any CAMAC users left? Matt Bickley
- Index:
1994
1995
1996
1997
1998
1999
2000
2001
2002
2003
2004
2005
2006
2007
2008
2009
2010
2011
<2012>
2013
2014
2015
2016
2017
2018
2019
2020
2021
2022
2023
2024
|