Experimental Physics and
Industrial Control System

"Graham Cross" <[email protected]> · Mon, 9 Jan 2012 17:48:16 -0000

Paul,
It was probably me who responded on this a couple of years ago.
We still support CAMAC serial Highway and can still manufacture and/or
maintain our VHD 2992 modules.
You can replace the MVME CPU and keep the 2992.

We have a PCI bus SHD 5992 serial highway driver card that has a Windows WDM
driver and ESONE/DOE subroutine support. Currently no EPICS support but not
impossible.

We still support a surprising number of CAMAC users.

Graham Cross
Hytec Electronics Ltd.
Incorporated in England No 1246940
VAT NO GB 285 2479 27
Tel:       +44 (0) 118 975 7770
Fax:      +44 (0) 118 975 7566
Mobile: +44 (0) 795 781 3862
Web: www.hytec-electronics.co.uk
++++++++++++++++++++++++++++++++++++++++++++
This email and any files transmitted with it are confidential and intended
solely for the use of the individual or entity to whom they are addressed.
If you have received this email in error, please notify the sender
immediately. The views expressed in the message are those of the individual
author and may not necessarily represent the views of Hytec Electronics Ltd.

>-----Original Message-----
>From: [email protected] [mailto:tech-talk-
>[email protected]] On Behalf Of Paul Sichta
>Sent: 09 January 2012 17:10
>To: [email protected]
>Subject: Any CAMAC users left?
>
>Our NSTX experiment (unfortunately) continues to use CAMAC. Our
>MVME-177 and Hytec VSD 2992 hardware has served us well and are ready
>to be retired and replaced with new hardware.  I'd be interested to
>hear what people are using to drive their CAMAC serial highways.  I
>asked a couple of years ago too, just looking for any updates.
>
>-- Paul Sichta

Experimental Physics and Industrial Control System

Experimental Physics and
Industrial Control System