Experimental Physics and
Industrial Control System

I think I must have missed the original message that this is a follow-up
to.

But if you use autosave to save the motor's DVAL and OFF, then on reboot
the RBV will be set to the correct value.

Mark


-----Original Message-----
From: [email protected]
[mailto:[email protected]] On Behalf Of [email protected]
Sent: Friday, April 08, 2011 11:26 AM
To: [email protected]
Subject: motor record RBV

The motors that are an issue have no encoders or limit switches, so
nothing for me to reference.  Does anyone have a slick solution for
"restoring" a motor's RBV?  Perhaps, something like setting the offset
to
the last RBV after a reboot or crash.

Thanks for your time.

Wesley

References:

motor record RBV wmoore

Navigate by Date:

Prev: RE: alarm auto dialer John Quintana

Next: Re: motor record RBV Ron Sluiter

Index: 1994  1995  1996  1997  1998  1999  2000  2001  2002  2003  2004  2005  2006  2007  2008  2009  2010  <2011>  2012  2013  2014  2015  2016  2017  2018  2019  2020  2021  2022  2023  2024 

Navigate by Thread:

Prev: motor record RBV wmoore

Next: motorx_all_mc.edl edm screen problem Jim Chen

Index: 1994  1995  1996  1997  1998  1999  2000  2001  2002  2003  2004  2005  2006  2007  2008  2009  2010  <2011>  2012  2013  2014  2015  2016  2017  2018  2019  2020  2021  2022  2023  2024