Experimental Physics and
Industrial Control System

Hello:

On 7/9/10 11:03 , "Andrew Johnson" <[email protected]> wrote:
> I would be very interested to know whether the libCom/test/epicsExceptionTest
> program detects this.
Yes, epicsExceptionTest fails, so it's a good test!
epicsTimeTest also fails on some exception.
Exeptions in general don't seem to function with our combination of vxWorks
6.7 & MV5500.

Other tests look OK.

> IIRC Ron Sluiter discovered a similar problem with C++ exceptions on the
> target solaris-x86_64-gnu which was detected by that test routine; I'm
> attributing that failure to gcc
I agree and would like to hear from other people who use VxWorks 6.7 with
the gnu compiler (WindRiver 4.1.2), maybe even on an MV5500 about their
vxWorks kernel settings and compiler flags.

Thanks,
Kay

Replies:

Re: VxWorks 6.7, MV5500 Andrew Johnson

References:

Re: VxWorks 6.7, MV5500 Re: EPICS R3.14.11, sequencer 2.0.12 crash on device support write error Andrew Johnson

Navigate by Date:

Prev: Re: linking to shared objects user libraries J. Lewis Muir

Next: Re: iocStats Ralph Lange

Index: 1994  1995  1996  1997  1998  1999  2000  2001  2002  2003  2004  2005  2006  2007  2008  2009  <2010>  2011  2012  2013  2014  2015  2016  2017  2018  2019  2020  2021  2022  2023  2024 

Navigate by Thread:

Prev: Re: VxWorks 6.7, MV5500 Re: EPICS R3.14.11, sequencer 2.0.12 crash on device support write error Andrew Johnson

Next: Re: VxWorks 6.7, MV5500 Andrew Johnson

Index: 1994  1995  1996  1997  1998  1999  2000  2001  2002  2003  2004  2005  2006  2007  2008  2009  <2010>  2011  2012  2013  2014  2015  2016  2017  2018  2019  2020  2021  2022  2023  2024