1994 1995 1996 1997 1998 1999 2000 2001 2002 2003 2004 2005 2006 2007 2008 2009 <2010> 2011 2012 2013 2014 2015 2016 2017 2018 2019 2020 2021 2022 2023 2024 | Index | 1994 1995 1996 1997 1998 1999 2000 2001 2002 2003 2004 2005 2006 2007 2008 2009 <2010> 2011 2012 2013 2014 2015 2016 2017 2018 2019 2020 2021 2022 2023 2024 |
<== Date ==> | <== Thread ==> |
---|
Subject: | Re: MEDM installation instructions |
From: | Eric Norum <[email protected]> |
To: | Andrew Wagner <[email protected]> |
Cc: | [email protected] |
Date: | Tue, 22 Jun 2010 09:16:39 -0700 |
I have the fink openmotif3 2.2.4-4 package installed on my OS X machine. Seems to work well with MEDM, EDM, StripTool and SDDSplot. MEDM is an extension: Download the extensions configuration files from EPICS Extensions Config Files Unpack the config file tarball. cd to the extensions directory created by unpacking the tarball. This directory will be referred to as the extensions <TOP> from now on Edit the configure/RELEASE file top refer to where you have EPICS base installed. Edit the configure/os/CONFIG_SITE.darwin-x86.darwin-x86 file and set up the correct references to your X11 and Motif packages. cd to the <TOP> directory and run make Now to download and build an extension -- medm in this case: Download the medm tarball: MEDM 3.1.4 cd to the <TOP>/src directory and unpack the medm tarball cd to the <TOP>/src/medm directory and run make On Jun 21, 2010, at 6:06 PM, Andrew Wagner wrote:
|