Experimental Physics and
Industrial Control System

Hi all,
I'm using some devices via a simple CAN device support for SocketCAN without 
support for acknowledged writes etc. The IOC instead periodically asks the 
devices for an update and they reply with a CAN packet containing the device 
status.

Now my question is very simple: What is the EPICS way of implementing a 
timeout which raises an alarm if a device did not answer for a given time? Is 
it possible to configure this alarm condition in the database?

Thanks a lot in advance.

Martin

-- 
Dipl. Phys. Martin Konrad
Technische Universität Darmstadt
Institut für Kernphysik
Schlossgartenstr. 9
64289 Darmstadt
Tel: 06151-16-5121
Fax: 06151-16-4321

Replies:

RE: Alarm if no status update received for a given time Dalesio, Leo

Navigate by Date:

Prev: RTEMS Survey Eric Norum

Next: Failed to create single DLLs on Windows Wang Xiaoqiang

Index: 1994  1995  1996  1997  1998  1999  2000  2001  2002  2003  2004  2005  2006  2007  2008  <2009>  2010  2011  2012  2013  2014  2015  2016  2017  2018  2019  2020  2021  2022  2023  2024 

Navigate by Thread:

Prev: RTEMS Survey Eric Norum

Next: RE: Alarm if no status update received for a given time Dalesio, Leo

Index: 1994  1995  1996  1997  1998  1999  2000  2001  2002  2003  2004  2005  2006  2007  2008  <2009>  2010  2011  2012  2013  2014  2015  2016  2017  2018  2019  2020  2021  2022  2023  2024