Hi Chris,
> Hi - I'd like to have a firewall configured on my linux system but
> when I turn it on then I get a timeout when accessing EPICS variables
> on a remote system. I thought it would be sufficient to enable TCP
> and UDP access on ports 5064 and 5065, since I'm running with a
> "standard" EPICS build on the latest release. Can anyone
> suggest what else I need to set in a firewall configuration to allow EPICS to work?
This is fine for destination ports but we also enable 1 to 65535 on source ports for the CA TCP connections.
Stephanie Allison
- References:
- Firewall configuration? Chris Jacobsen
- Navigate by Date:
- Prev:
RE: Firewall configuration? Mark Rivers
- Next:
Re: Firewall configuration? Chris Jacobsen
- Index:
1994
1995
1996
1997
1998
1999
2000
2001
2002
2003
2004
2005
2006
2007
2008
<2009>
2010
2011
2012
2013
2014
2015
2016
2017
2018
2019
2020
2021
2022
2023
2024
- Navigate by Thread:
- Prev:
Re: Firewall configuration? Chris Jacobsen
- Next:
problem using the gpib-asyn support Maurizio Montis
- Index:
1994
1995
1996
1997
1998
1999
2000
2001
2002
2003
2004
2005
2006
2007
2008
<2009>
2010
2011
2012
2013
2014
2015
2016
2017
2018
2019
2020
2021
2022
2023
2024
|