Experimental Physics and Industrial Control System
|
Hello,
I am trying to build and run edm. I am using the instructions from
"extensions/src/edm/README.install" that came in the tarfile. I am to
the following point in the instructions:
As an example here is what we set at the SNS:
-- EDMPVOBJECTS=$EPICS_EXTENSIONS/ext_pref/edm
-- EDMOBJECTS=$EPICS_EXTENSIONS/ext_pref/edm
-- EDMHELPFILES=$EPICS_EXTENSIONS/src/edm/helpFiles
-- EDMFILES=$EPICS_EXTENSIONS/ext_pref/edm
--
EDMDATAFILES=./:$IOCTOP/<system1>/opi/edl:$IOCTOP/<system2>/opi/edl
Also, we will make available the $EPICS_EXTENSIONS/ext_pref/edm
as an example.
This will be tarred up as ext_pref-edm.tar on our ftp site:
(ftp://snsftp.sns.ornl.gov/UPLOAD/controls/edm)
Some of the configuration steps may be discussed in the edm
documentation located
in the following: $EPICS_EXTENSIONS/src/edm/doc
I am having problems with the ftp site referenced above. First, I got
an access error, then when I tried again I did not get an access error
but the directory was empty. I was expecting to find an example
edmPvObjects file. Help would be appreciated?
Thanks,
Carl Schumann
- Replies:
- Re: EDM installation issues edmPvObjects, etc.? Kasemir, Kay (ky9)
- Navigate by Date:
- Prev:
Re: octave interface to epics Ned Arnold
- Next:
Re: EDM installation issues edmPvObjects, etc.? Kasemir, Kay (ky9)
- Index:
1994
1995
1996
1997
1998
1999
2000
2001
2002
2003
2004
2005
2006
2007
<2008>
2009
2010
2011
2012
2013
2014
2015
2016
2017
2018
2019
2020
2021
2022
2023
2024
- Navigate by Thread:
- Prev:
Re: octave interface to epics Ned Arnold
- Next:
Re: EDM installation issues edmPvObjects, etc.? Kasemir, Kay (ky9)
- Index:
1994
1995
1996
1997
1998
1999
2000
2001
2002
2003
2004
2005
2006
2007
<2008>
2009
2010
2011
2012
2013
2014
2015
2016
2017
2018
2019
2020
2021
2022
2023
2024
|
ANJ, 02 Sep 2010 |
·
Home
·
News
·
About
·
Base
·
Modules
·
Extensions
·
Distributions
·
Download
·
·
Search
·
EPICS V4
·
IRMIS
·
Talk
·
Bugs
·
Documents
·
Links
·
Licensing
·
|