EPICS Controls Argonne National Laboratory

Experimental Physics and
Industrial Control System

1994  1995  1996  1997  1998  1999  2000  2001  2002  2003  2004  2005  2006  2007  <20082009  2010  2011  2012  2013  2014  2015  2016  2017  2018  2019  2020  2021  2022  2023  2024  Index 1994  1995  1996  1997  1998  1999  2000  2001  2002  2003  2004  2005  2006  2007  <20082009  2010  2011  2012  2013  2014  2015  2016  2017  2018  2019  2020  2021  2022  2023  2024 
<== Date ==> <== Thread ==>

Subject: RE: RTEMS-GeSys_2.1.beta and cexp-1.5 for uC5282 Coldfire Module
From: "K.M Ha" <[email protected]>
To: "'Till Straumann'" <[email protected]>
Cc: [email protected]
Date: Wed, 30 Apr 2008 22:57:12 +0900
i was exclude function of "int _EXFUN(sigismember, (const sigset_t *,
int));" from
/usr/local/rtems/rtems-4.7/m68k-rtems4.7/include/sys/signal.h

after successfully compiled cexp-1.5 source for m68k-rtems4.7 target.

i tried below steps from INSTALL document;
make cross-m68k-rtems4.7
make install-m68k-rtems4.7 prefix=/usr/local/rtems/rtems-4.7
install build-X-m68k-rtems4.7/xsyms
/usr/local/rtems/rtems-4.7/bin/m68k-rtems4.7-xsyms

i will wating new GeSys.

Thanks.

Kiman,
 
 

-----Original Message-----
From: Till Straumann [mailto:[email protected]] 
Sent: Wednesday, April 30, 2008 2:45 AM
To: K.M Ha
Cc: [email protected]
Subject: Re: RTEMS-GeSys_2.1.beta and cexp-1.5 for uC5282 Coldfire Module

Unfortunately the versions on my website are too old.
We have been using GeSys on the uC5282 for a few years now.

I'll post a new version shortly.

WKR
-- Till

K.M Ha wrote:
> Hi All,
> i tried to make RTEMS-GeSys_2.1.beta for m68k-rtems.
> However i get below messages;
> [root@localhost RTEMS-GeSys_2.1.beta]# make
> Makefile:134: *** GeSys has not been ported/tested on this BSP
> (uC5282) yet.
> Anybody have a experiance of make GeSys object for uC5282 ?
> Second:
> I trid to cexp-1.5 for m68k-rtems, but i don't know how to make target 
> cpu uC5282.
> Anybody can advice to me how to make cexp object with EPICS base for
> uC5282 target ?
> If have cexp with EPICS base getting started manul then very helpful 
> and easy of access .
> Thanks,
> Kiman Ha









References:
RTEMS-GeSys_2.1.beta and cexp-1.5 for uC5282 Coldfire Module K.M Ha
Re: RTEMS-GeSys_2.1.beta and cexp-1.5 for uC5282 Coldfire Module Till Straumann

Navigate by Date:
Prev: Re: snapCmp.pl for SaveRestore.tcl Thomas Birke
Next: RE: Multiple IOCs on the same Host - question on dynamically allocatedTCP Ports Thompson, David H.
Index: 1994  1995  1996  1997  1998  1999  2000  2001  2002  2003  2004  2005  2006  2007  <20082009  2010  2011  2012  2013  2014  2015  2016  2017  2018  2019  2020  2021  2022  2023  2024 
Navigate by Thread:
Prev: Re: RTEMS-GeSys_2.1.beta and cexp-1.5 for uC5282 Coldfire Module Till Straumann
Next: 80 MHz clock for uC5282 Coldfire Module K.M Ha
Index: 1994  1995  1996  1997  1998  1999  2000  2001  2002  2003  2004  2005  2006  2007  <20082009  2010  2011  2012  2013  2014  2015  2016  2017  2018  2019  2020  2021  2022  2023  2024 
ANJ, 02 Sep 2010 Valid HTML 4.01! · Home · News · About · Base · Modules · Extensions · Distributions · Download ·
· Search · EPICS V4 · IRMIS · Talk · Bugs · Documents · Links · Licensing ·