EPICS Home EPICS Controls Argonne National Laboratory

Experimental Physics and
Industrial Control System

Format page
for printing


Search Tech-talk
1994  1995  1996  1997  1998  1999  2000  2001  2002  2003  2004  2005  2006  <2007>  2008  2009  2010  2011  2012  2013  2014  2015  2016  2017  2018  2019  2020  2021  2022  2023  2024  Index 1994  1995  1996  1997  1998  1999  2000  2001  2002  2003  2004  2005  2006  <2007>  2008  2009  2010  2011  2012  2013  2014  2015  2016  2017  2018  2019  2020  2021  2022  2023  2024 
<== Date ==> <== Thread ==>
Subject: Re: MVME6100 or 7100
From: Till Straumann <[email protected]>
To: Matt Rippa <[email protected]>
Cc: EPICS tech-talk <[email protected]>
Date: Wed, 28 Nov 2007 08:29:42 -0800 
LCLS (SLAC) uses the MVME6100 albeit with RTEMS not vxWorks.
Experience has been good.

-- Till

Matt Rippa wrote:
Hi All -

Are any sites using the MVME6100 on VxWorks 5.5.2/Tornado 2.2.1? If so, would you recommend these?

Has anyone considered the new MVME7100 board? I'm not sure on the state of the BSP.

Thanks,
-Matt


References:
MVME6100 or 7100 Matt Rippa
Navigate by Date:
Prev: Problem installing SDDS on OS X 10.5.1 Bertrand H.J. Biritz
Next: Re: Problem installing SDDS on OS X 10.5.1 Bob Soliday
Index: 1994  1995  1996  1997  1998  1999  2000  2001  2002  2003  2004  2005  2006  <2007>  2008  2009  2010  2011  2012  2013  2014  2015  2016  2017  2018  2019  2020  2021  2022  2023  2024 
Navigate by Thread:
Prev: MVME6100 or 7100 Matt Rippa
Next: Re: MVME6100 or 7100 Oleg Makarov
Index: 1994  1995  1996  1997  1998  1999  2000  2001  2002  2003  2004  2005  2006  <2007>  2008  2009  2010  2011  2012  2013  2014  2015  2016  2017  2018  2019  2020  2021  2022  2023  2024 
ANJ, 10 Nov 2011 Valid HTML 4.01! · Home · News · About · Base · Modules · Extensions · Distributions · Download ·
· Search · EPICS V4 · IRMIS · Talk · Bugs · Documents · Links · Licensing ·