Argonne National Laboratory

Experimental Physics and
Industrial Control System

1994  1995  1996  1997  1998  1999  2000  2001  2002  2003  2004  2005  <20062007  2008  2009  2010  2011  2012  2013  2014  2015  2016  2017  Index 1994  1995  1996  1997  1998  1999  2000  2001  2002  2003  2004  2005  <20062007  2008  2009  2010  2011  2012  2013  2014  2015  2016  2017 
<== Date ==> <== Thread ==>

Subject: Re: R3.14 support for MIPS (hkbaja47)
From: Matt Rippa <mrippa@gemini.edu>
To: tech-talk@aps.anl.gov
Date: Thu, 27 Apr 2006 18:43:21 -1000
Andrew -

The ppc604_long target loads and runs the new munch without exceptions. I can then monitor the test channels from a host. I did not get a 68K board put together, but the symbols did appear to resolve.

I sorted out the "iocClockSyncWithNTPserver:sntpcTimeGet S_sntpcLib_TIMEOUT" issue by setting a proper ntp host via EPICS_TS_NTP_INET.

Still tracking down the FPE on the mips...

thanks,
-Matt

References:
R3.14 support for MIPS (hkbaja47) Matt Rippa
Re: R3.14 support for MIPS (hkbaja47) Andrew Johnson
Re: R3.14 support for MIPS (hkbaja47) Matt Rippa

Navigate by Date:
Prev: caRepeater Al Honey
Next: Compiler error for base R3.14.8.2 on sparc Dirk Zimoch
Index: 1994  1995  1996  1997  1998  1999  2000  2001  2002  2003  2004  2005  <20062007  2008  2009  2010  2011  2012  2013  2014  2015  2016  2017 
Navigate by Thread:
Prev: Re: R3.14 support for MIPS (hkbaja47) Matt Rippa
Next: Problem resolving symbols during build. Walters, M (Malcolm)
Index: 1994  1995  1996  1997  1998  1999  2000  2001  2002  2003  2004  2005  <20062007  2008  2009  2010  2011  2012  2013  2014  2015  2016  2017 
ANJ, 02 Sep 2010 Valid HTML 4.01! · Home · News · About · Base · Modules · Extensions · Distributions · Download ·
· EPICS V4 · IRMIS · Talk · Bugs · Documents · Links · Licensing ·