Experimental Physics and
Industrial Control System

   Excellent! To really make it an EPICS experience, shouldn't
you have displayed the image on an EDM screen, rather than a
custom application (i.e. along with the camera controls which
are also presumably managed via EPICS)?

-- Larry

-----Original Message-----
From: Steven Hunt [mailto:[email protected]] 
Sent: Wednesday, September 01, 2004 12:18 PM
To: [email protected]
Subject: I see the light (with epics)


First light on new SLS beamline X05LA !

http://www.sls.psi.ch/controls/general/first_light_4.jpg

The image was captured using a firewire camera (point grey flea),
controlled from a PC running 3.14.4 on Linux. The image was transmitted
over channel access to a client on a standard beamline console.

This device support for firewire cameras was first developed for
Diamond, and is now also used on sls beamlines.

Replies:

RE: I see the light (with epics) Steven Hunt

References:

I see the light (with epics) Steven Hunt

Navigate by Date:

Prev: Re: Compiler switches on RISC byte alignment Andrew Johnson

Next: RE: I see the light (with epics) Steven Hunt

Index: 1994  1995  1996  1997  1998  1999  2000  2001  2002  2003  <2004>  2005  2006  2007  2008  2009  2010  2011  2012  2013  2014  2015  2016  2017  2018  2019  2020  2021  2022  2023  2024 

Navigate by Thread:

Prev: I see the light (with epics) Steven Hunt

Next: RE: I see the light (with epics) Steven Hunt

Index: 1994  1995  1996  1997  1998  1999  2000  2001  2002  2003  <2004>  2005  2006  2007  2008  2009  2010  2011  2012  2013  2014  2015  2016  2017  2018  2019  2020  2021  2022  2023  2024