EPICS Controls Argonne National Laboratory

Experimental Physics and
Industrial Control System

1994  1995  1996  1997  1998  1999  2000  2001  2002  2003  <20042005  2006  2007  2008  2009  2010  2011  2012  2013  2014  2015  2016  2017  2018  2019  2020  2021  2022  2023  2024  Index 1994  1995  1996  1997  1998  1999  2000  2001  2002  2003  <20042005  2006  2007  2008  2009  2010  2011  2012  2013  2014  2015  2016  2017  2018  2019  2020  2021  2022  2023  2024 
<== Date ==> <== Thread ==>

Subject: I see the light (with epics)
From: Steven Hunt <[email protected]>
To: [email protected]
Date: Wed, 01 Sep 2004 18:18:21 +0200
First light on new SLS beamline X05LA !

http://www.sls.psi.ch/controls/general/first_light_4.jpg

The image was captured using a firewire camera (point grey flea),
controlled from a PC running 3.14.4 on Linux. The image was transmitted
over channel access to a client on a standard beamline console.

This device support for firewire cameras was first developed for
Diamond, and is now also used on sls beamlines.


Replies:
RE: I see the light (with epics) Lawrence T. Hoff

Navigate by Date:
Prev: Re: Looking for VME trigger delay cards Ralph Lange
Next: Compiler switches on RISC byte alignment Dalesio, Leo
Index: 1994  1995  1996  1997  1998  1999  2000  2001  2002  2003  <20042005  2006  2007  2008  2009  2010  2011  2012  2013  2014  2015  2016  2017  2018  2019  2020  2021  2022  2023  2024 
Navigate by Thread:
Prev: How to install edm-1-10-1m with base-3.14.6 on linux-x86? Dorothea Wehler
Next: RE: I see the light (with epics) Lawrence T. Hoff
Index: 1994  1995  1996  1997  1998  1999  2000  2001  2002  2003  <20042005  2006  2007  2008  2009  2010  2011  2012  2013  2014  2015  2016  2017  2018  2019  2020  2021  2022  2023  2024 
ANJ, 10 Aug 2010 Valid HTML 4.01! · Home · News · About · Base · Modules · Extensions · Distributions · Download ·
· Search · EPICS V4 · IRMIS · Talk · Bugs · Documents · Links · Licensing ·