At 06:46 PM 5/27/2004, Deb Kerstiens wrote:
Hello all,
Anyone out there using Power 10 power supplies? If so, how did you
interface them? We're looking at an RS-232 server made by Quatech. Anyone
have experience with that?
thanks in advance!
deb
*********************
Deb Kerstiens
LANL LANSCE-8
[email protected]
*********************
5/28/2004
Good Morning Deb:
We here at the APS try to stay away from the RS232 or GPIB488 using the
internal DAC's,
many of them are only 12 bit resolution and depending on your specs
(application) that may not be good
enough. better than 90% of the supplies we use here are set-able via
external 16 bit DAC
and had the expected results.
I would like to hear what the result of your final decision, we are always
looking at new and better
options.
<---------------------------------------------------------------->
ALBERT L. HILLMAN Advanced Photon Source
http://www.aps.anl.gov
E-MAIL [email protected] Argonne National Laboratory
PHONE (630)-252-3569 9700 South Cass Avenue
FAX (630)-252-5291 Argonne, Illinois 60439
<---------------------------------------------------------------->
- References:
- EPICS indexed by the FSF/UNESCO Free Software Directory Jeff Hill
- Power Ten power supplies Deb Kerstiens
- Navigate by Date:
- Prev:
Power Ten power supplies Deb Kerstiens
- Next:
Re: Power Ten power supplies Steven Hartman
- Index:
1994
1995
1996
1997
1998
1999
2000
2001
2002
2003
<2004>
2005
2006
2007
2008
2009
2010
2011
2012
2013
2014
2015
2016
2017
2018
2019
2020
2021
2022
2023
2024
- Navigate by Thread:
- Prev:
Power Ten power supplies Deb Kerstiens
- Next:
Re: Power Ten power supplies Steven Hartman
- Index:
1994
1995
1996
1997
1998
1999
2000
2001
2002
2003
<2004>
2005
2006
2007
2008
2009
2010
2011
2012
2013
2014
2015
2016
2017
2018
2019
2020
2021
2022
2023
2024
|