Experimental Physics and
Industrial Control System

On Thu, 27 May 2004, Deb Kerstiens wrote:

> Anyone out there using Power 10 power supplies?  If so, how did you
> interface them?  We're looking at an RS-232 server made by Quatech.

We had a large number of Power 10's in use, but have phased out most of
them in the last few years. We just used an external 16-bit DAC for
control and a SAM for readback, though the performance of the PS wasn't at
the 16-bit level. Our experience with the Power 10's was good
reliablility, but the performance wasn't up to our requirements,
particularly 60 Hz AC ripple.

-- 
Steve Hartman
[email protected] || 919-660-2650
Duke Free Electron Laser Laboratory

References:

EPICS indexed by the FSF/UNESCO Free Software Directory Jeff Hill

Power Ten power supplies Deb Kerstiens

Navigate by Date:

Prev: Re: Power Ten power supplies AL Hillman

Next: EtherIP & AB PLC's D Wetherholt

Index: 1994  1995  1996  1997  1998  1999  2000  2001  2002  2003  <2004>  2005  2006  2007  2008  2009  2010  2011  2012  2013  2014  2015  2016  2017  2018  2019  2020  2021  2022  2023  2024 

Navigate by Thread:

Prev: Re: Power Ten power supplies AL Hillman

Next: MEDM crashes immediately under Linux J. Lewis Muir

Index: 1994  1995  1996  1997  1998  1999  2000  2001  2002  2003  <2004>  2005  2006  2007  2008  2009  2010  2011  2012  2013  2014  2015  2016  2017  2018  2019  2020  2021  2022  2023  2024