Experimental Physics and
Industrial Control System

We use a mix of GS Ip-OctalSerial and terminal server interfaces
at the SDSS telescope. The terminal server solution works well and 
requires no extra VME hardware and generally shorter RS-232 runs.

I concur with Maren.

	- P. 
Maren Purves wrote:
> Hi Garrett,
> 
> in my opinion, and I think most of the people here would agree,
> get a terminal server. The serial lines themselves aren't going to
> be any more or less pain, but the rest is fairly simple (involves
> tnetDev, drvSerial, drvAscii for all of them, and a few lines in
> your startup file).
> 
> Aloha,
> 
> Maren

-- 
Peregrine M. McGehee	[email protected]	(505) 667-3273
Sloan Digital Sky Survey / Spallation Neutron Source
MS H820, Los Alamos National Laboratory, Los Alamos, NM 87545

References:

Multi RS-232 ports Garrett D. Rinehart

Re: Multi RS-232 ports Maren Purves

Navigate by Date:

Prev: Re: Multi RS-232 ports Maren Purves

Next: EPICS base on MacOS X Pete R. Jemian

Index: 1994  1995  1996  1997  1998  1999  2000  2001  <2002>  2003  2004  2005  2006  2007  2008  2009  2010  2011  2012  2013  2014  2015  2016  2017  2018  2019  2020  2021  2022  2023  2024 

Navigate by Thread:

Prev: Re: Multi RS-232 ports Maren Purves

Next: Re: Multi RS-232 ports Mohan Ramanathan

Index: 1994  1995  1996  1997  1998  1999  2000  2001  <2002>  2003  2004  2005  2006  2007  2008  2009  2010  2011  2012  2013  2014  2015  2016  2017  2018  2019  2020  2021  2022  2023  2024